Abstract:In this paper, the ultrasonic shot peening (USSP) technology was used to obtained surface nanocrystalline of 20 carbon steel. The grain size of test surface and the thickness of nanocrystallization layer were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The three electrode electrochemical measurement was employed to investigate the electrochemical corrosion performance and the critical character of USSP surface nanocrystallization samples in different impact strength. The results showed that the USSP surface nanocrystallization could obtain the nanocrystalline grain. The thickness of nanocrystallization layer increased and grain sizes reduced with the increase of the impact strength. Nanocrystallization layer took the way to expand concentric circles with impact crater as the center. The corrosion current of nanocrystallization sample was much larger than as-received. The controlled step of corrosion process was turned from cathodic process to anodic process by USSP surface nanocrystallization. The sample surface formed two layers corrosion product films in condensate water, which were compact Fe3O4 membrane as inner corrosion product film and loose Fe3O4 membrane or Fe2O3 membrane as outer layer. With the increase of the impact strength, critical velocity of the outer corrosion product film increased gradually. The critical velocity of inner corrosion product film had an increasing trend, but the critical velocity tended to be a constant value when impact strength was more than 1.9904min/cm(2).

Research on the Wet Shot Blasting Technology of Strip Steel Surface Topography and Finite Element Simulation

Wet Shot Blasting Technology for Cleaning Strip Steel Surface Oxide Layer

Successful Application of Spray Cooling Tower In SGIS's Consteel EAF

Flow simulation and optimization on a new technic used to control dust from cold-rolled strip

Finite element simulation of welding process and real-time monitoring assessment

Research on quality inspection and process optimization of ship surface shot blasting and sand blasting treatment

Study on Surface Quality of Stainless Steel Workpiece Polished by Abrasive Water Jet

Active Control of Surface Integrity in Thin Film Scratching and Finishing

Analysis of gas-solid two-phase flow and structure optimization of mobile shot blasting machine recovery device

Shot Stream Finite Element Model for Shot Peening Numerical Simulation and Its Experiment Study

The Removal Mechanism Experimental Research of Smooth and Flat Processing of Abrasive Water Jet to Single Abrasive Particles

Experimental Research on Surface Shot Peening of 18Cr2Ni4WA Steel Gear

Process Optimization of Straightening Scale Breaking and Pickling Process for Residual Oxide Scale on Surface of Hot Rolled Strip Steel

Effect of baffle on flow and pressure fields of strip steel edge in the continuous hot-dip galvanizing process

Study on Dry-Ice Particle Jet Polishing Process of 316L Stainless Steel Electrode

Process Optimization and Residual Stress Measurement for Arc Spraying Rapid Tooling

Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water

Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation

Improving the wettability of oxide layers to enhance the bonding strength of shot-blasting steel substrates by using simple resin pre-coating method

Study on optimization of shotcrete loading technology and the diffusion law of intermittent dust generation

Analysis and control of feathering defects on surface of cold rolled thin gauge high strength steel