Abstract:A generic fiber positioning strategy and a fabrication path are presented for microlens-fiber-coupled integral field units. It is assumed that microlens-produced micro-images are carried to the spectrograph input through step-index,multi-mode fiber, but our results apply to micro-pupil reimaging applications as well. Considered are the performance trades between the filling percentage of the fiber core with the micro-image versus throughput and observing efficiency.A merit function is defined as the product of the transmission efficiency and the etendue loss. For a hexagonal packing of spatial elements, the merit function has been found to be maximized to 94% of an ideal fiber IFU merit value (which has zero transmission loss and does not increase the etendue) with a microlens-fiber alignment (centering) tolerance of 1 um RMS. The maximum acceptable relative tilt between the fiber and the microlens face has been analyzed through optical modeling and found to be 0.3 degree RMS for input f-ratio slower than f/3.5 but it is much more relaxed for faster beams. Several options of fabricating fiber holders have been compared to identify cost-effective solutions that deliver the desired fiber positioning accuracy. Femto-second laser-drilling methods deliver holes arrayed on plates with a position and diameter accuracy of 1.5 um RMS, and with an aspect ratio of 1:10. A commercial vendor produces plates with thickness of 5 mm, but with similar (1 um RMS) positioning accuracy. Both of these techniques are found to be moderately expensive. A purely photo-lithographic technique performed at WCAM (a facility at the University of Wisconsin, Madison), in tandem with deep reactive ion etching, has been used to produce a repeatable recipe with 100% yield. Photo-lithography is more precise (0.5 um RMS) in terms of hole positioning and similar diameter accuracy (1 um RMS).

Microlens Fabrication Using Hebs Glass for Compact High-Resolution Ir Imaging System

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

High-Resolution Dmd-Fpm System Based On Ring Pattern Phase Retrieval Algorithm

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Monolithic Kilopixel Silicon Microlens Arrays for Future Far-Infrared Observatories

Imaging with High Resolution and Wide Field of View Based on an Ultrathin Microlens Array

Design, fabrication and testing of a compact large-field-of-view infrared compound eye imaging system by precision glass molding

Direct write of microlens array using digital projection photopolymerization

Fabrication of IR microlens using a fiber laser

Computational Diffraction-Limited Imaging with a Non-Imaging Spatial Information Transfer Lens

Thin Infrared Imaging Systems Through Multichannel Sampling

Compact high resolution multi-aperture LWIR imaging system

Holographic Illumination in Optical Readout Focal Plane Array Infrared Imaging System.

Fabrication of multi-focal chalcogenide glass microlens arrays based on femtosecond laser-assisted chemical etching method

Holographic Compensation-Based Optical Readout Technique For Microcantilever Ir Image System

Single-pulse Writing of a Concave Microlens Array.

Fiber positioning in microlens-fiber coupled integral field unit

Optical-digital joint design of multi-order diffractive lenses for lightweight high-resolution computational imaging

A Simple Doublet Lens Design for Mid-Infrared Imaging

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate

Fabrication of 3-D light concentrating microphotonic structures by anisotropic wet etching of silicon