Abstract:In this contribution, we demonstrate a wide-field hyperspectral mid-infrared (MIR) microscope based on multidimensional single-pixel imaging (SPI). The microscope employs a high brightness MIR supercontinuum source for broadband (1.55 [Formula: see text]-4.5 [Formula: see text]) sample illumination. Hyperspectral imaging capability is achieved by a single micro-opto-electro-mechanical digital micromirror device (DMD), which provides both spatial and spectral differentiation. For that purpose the operational spectral bandwidth of the DMD was significantly extended into the MIR spectral region. In the presented design, the DMD fulfills two essential tasks. On the one hand, as standard for the SPI approach, the DMD sequentially masks captured scenes enabling diffraction-limited imaging in the tens of millisecond time-regime. On the other hand, the diffraction at the micromirrors leads to dispersion of the projected field and thus allows for wavelength selection without the application of additional dispersive optical elements, such as gratings or prisms. In the experimental part, first of all, the imaging and spectral capabilities of the hyperspectral microscope are characterized. The spatial and spectral resolution is assessed by means of test targets and linear variable filters, respectively. At a wavelength of 4.15 [Formula: see text] a spatial resolution of 4.92 [Formula: see text] is achieved with a native spectral resolution better than 118.1 nm. Further, a post-processing method for drastic enhancement of the spectral resolution is proposed and discussed. The performance of the MIR hyperspectral microsopce is demonstrated for label-free chemical imaging and examination of polymer compounds and red blood cells. The acquisition and reconstruction of Hadamard sampled 64 [Formula: see text] 64 images is achieved in 450 ms and 162 ms, respectively. Thus, combined with an unprecedented intrinsic flexibiliy gained by a tunable field of view and adjustable spatial resolution, the demonstrated design drastically improves the sample throughput in MIR chemical and biomedical imaging.

A Simple Doublet Lens Design for Mid-Infrared Imaging

Multispectral Filters for MIR Spectral Imaging Applications

Optical Design of a Triple-Waveband Hybrid System

Doublet Metalens with Simultaneous Chromatic and Monochromatic Correction in the Mid-Infrared

Diffraction-limited hyperspectral mid-infrared single-pixel microscopy

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Mid-infrared wide-field nanoscopy

Imaging from the Visible to the Longwave Infrared wavelengths via an inverse-designed flat lens

Design of mid-wave infrared achromatic double-layer metalens with enhanced efficiency

Design of a Catadioptric Mid-Wave Infrared Telecentric Microscope with High Numerical Aperture and Long Working Distance

Design of an Ultra-Thin Dual Band Infrared System

High‐Efficiency All‐Dielectric Metalenses for Mid‐Infrared Imaging

Mid-wave infrared multispectral imaging by DOE

Dual-Comb Mid-Infrared Spectromicroscopy with Photothermal Fluorescence Detection

In-Lab High Resolution Mid-infrared Up-conversion Stellar Interferometer Based on Synthetic Long Base-Line

Design of Double-Channel Hyperspectral Imaging System Based on Curved Prism

Microlens Fabrication Using Hebs Glass for Compact High-Resolution Ir Imaging System

Inverse-designed flat lens for imaging in the visible & near-infrared with diameter > 3mm and NA=0.3

Pushing the Resolution of Infrared Imaging by Mid Infrared Photothermal Microscopy

Achromatic and Coma-Corrected Hybrid Meta-Optics for High-Performance Thermal Imaging

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate