Abstract:Stress corrosion cracking (SCC) is a major problem in the welded components of austenitic stainless steel in nuclear power plants. High tensile residual stress is an important factor resulting in the SCC of materials. Austenitic stainless steel has a strong tendency for work hardening owing to its fcc crystal structure and low stacking-fault energy. High plastic strain can accumulate during a multipass welding process. On the other hand, accumulated strain hardening can be reduced or even eliminated during the welding thermal cycles owing to dynamic recovery, recrystallization, and grain growth below the melting point, which is called the annealing effect. Influence of strain hardening and annealing effect needs to be investigated to predict the welding-induced residual stresses accurately in austenitic stainless steel joints. In this study, a new time-temperature-dependent annealing model was proposed based on the Johnson-Mehl-Avrami equation. Numerical Satoh tests were performed to clarify the influence of strain-hardening models (i.e., the isotropic strain-hardening model and Chaboche mixed isotropickinematic strain-hardening model) and annealing models (i. e., the single-stage annealing model and new time-temperature-dependent annealing model) on the formation of residual stresses and the accumulated plastic strain during multiple thermal cycles. Thermoelastic-plastic finite element (FE) analyses were carried out to predict the welding residual stresses and accumulated plastic strain in a thick-wall 316 stainless steel butt-welded pipe joint with 85 welding passes. The residual stresses of the welded joint were measured by the sectioning method, inherent strain method, and deep-hole drilling method. The simulations of welding residual stresses were compared with the measurements. Annealing effect significantly influences the formation of accumulated plastic strain and welding residual stresses, neglecting which will result in a significant overestimation of FE results. The proposed annealing model showed an excellent match to the experimental data. With the consideration of the annealing effect, the isotropic strain-hardening model overestimated the welding residual stresses slightly, while the FE results of welding residual stresses using the Chaboche mixed strain-hardening model showed better agreement with the measurements. The single-stage annealing model revealed a recommended annealing temperature of 900-1000 degrees C for austenitic stainless steel such as 316 stainless steel.

Effect of Strain Hardening Constitutive Relations on Weld Residual Stress Simulation of Dissimilar Metal Weld

A Method for Establishing a Continuous Constitutive Model of Welded Metals

Effect of Mechanical Heterogeneity on Strain and Stress Fields at Crack Tips of SCC in Dissimilar Metal Welded Joints

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Investigation on residual stress of EQ56 high strength steel butt weld

Influence of Strain Hardening and Annealing Effect on the Prediction of Welding Residual Stresses in a Thick-Wall 316 Stainless Steel Butt-Welded Pipe Joint

Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

A physically consistent 2D residual stress model for approximating 3D effects in welding

Three-Dimensional Numerical Simulation of Weld Solidification Cracking

Characterization of Heterogeneous Constitutive Relationship of the Welded Joint Based on the Stress-Hardness Relationship Using Micro-Hardness Tests

Prediction of Residual Stresses Within Dissimilar Al/steel Friction Stir Lap Welds Using an Eulerian-based Modeling Approach

Residual Stress Modeling and Advanced Diffraction Measurements of 347H Steel Weldments

Strength Mismatch Effect on Residual Stress of High Strength Steel Butt-Welded Joints

Numerical Simulation of Residual Stress in 10ni5crmov Steel Weldments

Finite Element Simulation for Residual Stresses in Weling Process

On Residual Stress and Relief for an Ultra-Thick Cylinder Weld Joint Based on Mixed Hardening Model: Numerical and Experimental Studies

Strength Mismatch Effect on Residual Stress of 10crni3mov Steel Considering the Back-Chipping Process

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation

Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations