Abstract:Single-walled carbon nanotubes (SWNTs) are promising nanomaterials for incorporation into organic electronic devices (OEDs), with the potential to fabricate flexible devices while exploiting inexpensive solution-processing techniques. As-synthesized SWNTs are insoluble and comprised of a mixture of metallic and semiconducting SWNTs (sc-SWNTs), necessitating dispersal and purification before integration into OEDs. Refinement of conjugated polymer extraction techniques has allowed for the isolation of sc-SWNTs from metallic in a reproducible and scalable manner. The availability of highly-pure sc-SWNT materials has facilitated the production of thin-film transistors (TFTs) with very high charge carrier mobilities, outperforming organic small molecule and polymer semiconductors. However, the realization of commercial OED applications of polymer-sorted sc-SWNTs have not yet been achieved, partially due to the prohibitive time and materials costs associated with purifying sc-SWNTs. Current protocols for dispersing sc-SWNTs with conjugated polymers involve three broad steps: (1) dispersion of bulk SWNT material, (2) removal of non-dispersed carbonaceous materials, and (3) removal of excess polymer through filtration or centrifugation. The final step of removal of excess polymer is time-consuming and wasteful, but viewed as necessary for preparing high-performing TFTs, as the conjugated polymer has much lower performance compared to SWNTs. In this study we performed the first systematic investigation of the effect of excess polymer on SWNT TFT performance. Three SWNT concentrations were investigated, with varying ratios of excess polymer added to each. TFT device performance was monitored using several metrics, including: mobility, threshold voltage, on/off ratios and hysteresis. Characterization of large numbers of replicate TFT devices determined that below a threshold amount of excess polymer the presence of excess polymer did not have a negative impact on device performance. Detailed analysis of the sc-SWNT films through Raman spectroscopy and atomic force microscopy (AFM) confirmed that a simple rinsing step was sufficient to remove all the unbound conjugated polymer from the substrate surface without affecting the sc-SWNT network. The volume of solvent required for the rinsing step was substantially lower than that required for filtration or centrifugation steps. Furthermore, at higher SWNT concentrations the excess polymer prevented nanotube bundling, resulting in moderate improvements in both mobility and on/off ratios. Our results were reproducible for two different conjugated polymer sc-SWNT systems, demonstrating the versatility of this procedure.

Ex-situ Preparation of High-Conductive Polymer/swnts Nanocomposites for Structure Fabrication

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Using In-Situ Polymerization of Conductive Polymers to Enhance the Electrical Properties of Solution-Processed Carbon Nanotube Films and Fibers

Single-walled Carbon Nanotube–polymer Composites: Electrical, Optical and Structural Investigation

Polymer-Nanotube Composites: Burying Nanotubes Improves Their Field Emission Properties

Fabrication and Electrical Properties Analysis of Swcnts/Pdms Composites

A novel synthetic route to metal–polymer nanocomposites by in situ suspension and bulk polymerizations

"Fishing" Polymer Brushes on Single-Walled Carbon Nanotubes by In-Situ Free Radical Polymerization in A Poor Solvent

Preparation of short carbon fiber/polydimethylsiloxane conductive composites based on continuous spatial‐confining network assembly technique

Conjugated Polymer-Controlled Selective Dispersion of Single-Walled Carbon Nanotubes and Fabrication of Network Transistors

Preparation of carbon black/graphene nanosheets/PP composites with 3D separated conductive networks based on selective laser sintering

Preparation of silver nanowires and their application in conducting polymer nanocomposites

Fabrication Of Bimetallic Nanoparticles/Multi-Walled Carbon Nanotubes Composites For Microelectronic Circuits

Influence of Excess Conjugated Wrapping Polymer in Semiconducting Single-Walled Carbon Nanotube Dispersions

Single-Walled Carbon Nanotubes Functionalized with High Bonding Density of Polymer Layers and Enhanced Mechanical Properties of Composites

Highly Ordered 3D Graphene-Based Polymer Composite Materials Fabricated by “Particle-Constructing” Method and Their Outstanding Conductivity

Preparation And Characterization Of Conducting Polymer/Nano Silver Composites

A Novel Conductive Composites: Preparation And Electrical Property Of Polypyrrole Coated Carbon Nanotubes

Producing Superior Composites by Winding Carbon Nanotubes Onto A Mandrel under A Poly(Vinyl Alcohol) Spray

Removable and Recyclable Conjugated Polymers for Highly Selective and High-Yield Dispersion and Release of Low-Cost Carbon Nanotubes

Single-Step in Situ Preparation of Polymer-Grafted Multi-Walled Carbon Nanotube Composites under <sup>60</sup>Co γ-Ray Irradiation