Abstract:The ever-increasing demand for higher I/O counts on chip requires the finer pitches to improve the performance, cost effectiveness and higher yield. The conventional under bump metallization (UBM) technology may not guarantee the required performance due to higher current density and diffusivity nowadays. In order to overcome these challenges, a UBM with higher strength and resistance to diffusion, better thermal and microstructural properties are required. Recently, nano reinforced Ni-P alloy has been identified as potential approach. Especially, the addition of Carbon nanotube (CNT) was expected to provide strengthening to the resulting UBM layers. CNTs have exceptional and attractive thermal, electrical, and mechanical properties, and are believed to be ideal material for fabricating composites. However, due to the large surface volume ratio, CNTs have strong tendency to agglomerate, which results in clusters. CNT clusters may lead to void formation and further cracking. Therefore, it is of great importance to figure out methods to disperse and incorporate CNTs into Ni-P UBM. In order to disperse carbon nano-tubes in electroless Ni-P coatings, two approaches were employed. Chemical modification, which includes acid oxidation treatment and surfactant treatment were conducted to disperse CNT clusters. Meanwhile, magnetic stirring and ultrasonic agitation were also employed to prepare the CNT/Ni-P composite coatings with CNTs homogeneously embedded. SEM and TEM were used to observe the dispersion after adopting the aforementioned treatment as well as the surface morphology of the deposited layers. It was verified that the dispersion can be significantly improved after proper treatment process, and surface of the CNT/Ni-P was quite smooth; CNTs were equably dispersed throughout the matrix. In addition, the interfacial bonding between CNTs and Ni-P coatings was good and firm. In these cases, an understanding of the effects of the acid oxidation, surfactant dispersant- magnetic stirring and ultrasonic agitation on CNT dispersion in both solution and deposited layer were ascertained.

Fabrication Of Bimetallic Nanoparticles/Multi-Walled Carbon Nanotubes Composites For Microelectronic Circuits

Fabrication of Multiwalled Carbon Nanotube Bridges by Poly-Methylmethacrylate Suspended Dispersion

Fabrication of Multi - Walled Carbon Nanotubes/sbs Composite and Its Electrical Percolation

Fabrication and electrical characterization of multiwalled carbon nanotube-based circuit at room temperature

Fabrication of Flexible Conductive Composites Based on Copper Nanowires

Fabrication of Polymer Composite Fibers Embedding Ultra-Long Micro/Nanowires

A facile and simple phase-inversion method for the fabrication of Ag nanoparticles/multi-walled carbon nanotubes/poly(vinylidene fluoride) nanocomposite with high-efficiency of electrocatalytic property

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Improving the electrical conductivity of multiwalled carbon nanotubes‐containing micromoldings via in situ construction of electrically conductive networks

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Interfacial Distribution of PMMA-grafted MWCNTs in Immiscible Blends for Improved Electrical Conductivity

Ice-templated assembly strategy to construct three-dimensional thermally conductive networks of BN nanosheets and silver nanowires in polymer composites

Ag metal interconnect wires formed by pseudoplastic nanoparticles fluid imprinting lithography with microwave assistant sintering

Modeling and characterization of the electrical conductivity on metal nanoparticles/carbon nanotube/polymer composites

Flexible Electrospun Polyvinylidene Fluoride Nanofibrous Composites with High Electrical Conductivity and Good Mechanical Properties by Employing Ultrasonication Induced Dispersion of Multi-Walled Carbon Nanotubes

Preparation and Characterization of A Poly[Ni(Salen)]/Multiwalled Carbon Nanotube Composite by in Situ Electropolymerization As A Capacitive Material

Effective method to disperse and incorporate Carbon nanotubes in electroless Ni-P deposits

Improving the Conductivity and its Flexibility of Fabricated Chips from A copolymer PDMS-PEI and Nano Graphene Metals composite

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

Carbon Nanotube/Cu Nanowires/Epoxy Composite Mats with Improved Thermal and Electrical Conductivity