Highly Conductive, Twistable and Bendable Polypyrrole–carbon Nanotube Fiber for Efficient Supercapacitor Electrodes

Ruiqiao Xu,Jinquan Wei,Fengmei Guo,Xian Cui,Tianyi Zhang,Hongwei Zhu,Kunlin Wang,Dehai Wu

DOI: https://doi.org/10.1039/c5ra01917f

IF: 4.036

2015-01-01

RSC Advances

Abstract:Carbon nanotubes (CNTs) are a promising candidate for flexible and wearable electronic applications.

What problem does this paper attempt to address?

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Yue Zhou,Yu Cai,Tingting Tu,Shanshan Zhang,Tianyu Li,Lu Fang,Dong Wang,Yitao Liang,Zhaoyang Wang,Yu Jiang,Congcong Zhou,Bo Liang

DOI: https://doi.org/10.1021/acsami.3c06815

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:Carbon nanotube fibers (CNTFs) are widely utilized in flexible and wearable electronics due to their outstanding electrical and mechanical properties. However, the spinning process of CNTFs has limited the CNTs from exposure, leading to an ultralow usage efficiency of individual CNTs. Here, we propose an electrochemical expansion strategy of a single CNTF at the liquid-air interface, forming a macroscopic spindle-shaped CNTF (SS-CNTF) with an enlarged volume of up to 5000-fold upon the spindle. The obtained spindle-shaped structure endows CNTF with a high specific surface area together with excellent conductivity and good mechanical properties. Therefore, the SS-CNTF-based devices exhibit outstanding performances both in energy storage (electrical double-layer supercapacitor, energy density: 11.22 Wh kg-1, power density: 203.9 kW kg-1) and electrochemical sensing (ascorbic acid: 1.26 μA μM-1 cm-2; dopamine: 103.91 μA μM-1 cm-2; uric acid: 11.53 μA μM-1 cm-2). The novel architecture of SS-CNTF prepared by one-step electrochemical expansion at the liquid-air interface enabled its high performance in multiple applications, providing new insight into the development of CNTF-based devices.
Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Long Chen,Deping Li,Lina Chen,Pengchao Si,Jinkui Feng,Lin Zhang,Yanhui Li,Jun Lou,Lijie Ci

DOI: https://doi.org/10.1016/j.carbon.2018.06.022

IF: 10.9

2018-01-01

Carbon

Abstract:Carbon nanofibers yarns (CNY) have been prepared by carbonizing twisted electrospun PAN nanofibers, which can be used as the electrode of fiber-shaped all-solid-state supercapacitor after depositing conductive polymer of polypyrrole (PPy) and reduced graphene oxide (rGO) on their surface to form a core-shell structure (CNY@PPy@rGO). The flexible and binder-free fiber supercapacitors with PVA/H3PO4 gel electrolyte have a high specific capacitance (92.57 F/g, 80.46 F/cm3, 836.87 mF/cm2, and 111.46 mF/cm of CM, CV, CA, and CL, respectively, at the scan rate of 2 mV/s) thanks to the core-shell structure and synergistic effects of three conponents. It also shows high cycling performance with 86% capacitance retention after 10000 cycles with excellent flexibility and stability at different bending angles.
Flexible, Weavable And Efficient Microsupercapacitor Wires Based On Polyaniline Composite Fibers Incorporated With Aligned Carbon Nanotubes

Zhenbo Cai,Li Li,Jing Ren,Longbin Qiu,Huijuan Lin,Huisheng Peng

DOI: https://doi.org/10.1039/c2ta00274d

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:A supercapacitor in a flexible wire format has potential advantages that are described in this paper. Polyaniline composite fibers incorporated with aligned multi-walled carbon nanotubes are first synthesized with high mechanical strength and electrical conductivity through an easy electrodeposition process, and two robust composite fibers have then been twisted to produce microsupercapacitor wires with a specific capacitance of 274 F g(-1) or 263 mF cm(-1). These energy storage wires are light-weight, flexible, strong and weavable for promising applications in various fields.
Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Yunming Jia,Lan Zhou,Jianzhong Shao

DOI: https://doi.org/10.1016/j.synthmet.2018.09.016

IF: 4

2018-01-01

Synthetic Metals

Abstract:The miniaturized supercapacitors are promising energy storage devices that can replace traditional batteries in portable electronics. Excellent graphene-based fibers have becoming a dominant role as electrode materials for supercapacitors. Unique and excellent carbon nanotubes and graphene composite fibers (G/CNTs) with outstanding mechanical properties and excellent capacitive behaviors were prepared by a facile, one-step and timesaving process. Scanning electron microscopy images displayed that the diameter of obtained G/CNTs was similar to 150 mu m, and showed a directional structure of graphene nanosheets and few-walled carbon nanotubes (FWNTs) along the specific direction of the as-prepared composite fibers. The electrochemical performances of the resultant fibers as flexible electrodes were estimated by a three-electrode system. The as-synthesized G/CNTs delivered a specific volumetric capacitance of 312.6 F g(-1) at the current density of 200 mA g(-1), and the capacitance of Gio/CNTs could still remain at 89.6% of original capacitance after 10,000 cycles. Furthermore, the flexible G/CNTs could be fabricated into a stretchable and compressible fiber spring. The fiber super capacitor displayed much efficient electrochemical capacitive behaviors, promising for being portable and wearable electronics, and this development can potentially promote its application in other fields.
Textile Electrodes Woven by Carbon Nanotube-Graphene Hybrid Fibers for Flexible Electrochemical Capacitors.

Huhu Cheng,Zelin Dong,Chuangang Hu,Yang Zhao,Yue Hu,Liangti Qu,Nan Chen,Liming Dai

DOI: https://doi.org/10.1039/c3nr00320e

IF: 6.7

2013-01-01

Nanoscale

Abstract:Functional graphene-based fibers are promising as new types of flexible building blocks for the construction of wearable architectures and devices. Unique one-dimensional (1D) carbon nanotubes (CNTs) and 2D graphene (CNT/G) hybrid fibers with a large surface area and high electrical conductivity have been achieved by pre-intercalating graphene fibers with Fe3O4 nanoparticles for subsequent CVD growth of CNTs. The CNT/G hybrid fibers can be further woven into textile electrodes for the construction of flexible supercapacitors with a high tolerance to the repeated bending cycles. Various other applications, such as catalysis, separation, and adsorption, can be envisioned for the CNT/G hybrid fibers.
Carbon nanotube-based electrodes for flexible supercapacitors

Sheng Zhu,Jiangfeng Ni,Yan Li

DOI: https://doi.org/10.1007/s12274-020-2729-5

IF: 9.9

2020-03-31

Nano Research

Abstract:Flexible supercapacitors (SCs) have attracted increasing attention as the power supply unit for portable/wearable electronics. Carbon nanotubes (CNTs) are promising candidate materials for flexible SC electrodes because of their outstanding mechanical property, high electrical conductivity, large surface area, and functionability. CNTs can assemble into various macroscopic materials with different dimensions. In this review, flexible CNT assemblies including 1D fibers, 2D films, and 3D aerogels and sponges are introduced with a focus on the design strategies and fabrication techniques. The recent developments and state-of-the-art applications of such structures as electrodes in flexible SCs are summarized based on device configurations including sandwiched, interdigital in-plane, and cable-type configurations. The flexible CNT-based electrodes have shown great advantages in bendability, stretchability and/or compressibility, as well as a long cycle lifetime. The current challenges and future research opportunities in this field are also discussed.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Nanostructured conductive polypyrrole hydrogels as high-performance, flexible supercapacitor electrodes

Ye Shi,Lijia Pan,Borui Liu,Yaqun Wang,Yi Cui,Zhenan Bao,Guihua Yu

DOI: https://doi.org/10.1039/c4ta00484a

2014-01-01

J. Mater. Chem. A

Abstract:A spongy polypyrrole based conductive hydrogel with chemically tunable structures and electrochemical characteristics was developed for highly flexible solid-state supercapacitors.
High Performance Carbon Nanotube Based Fiber-Shaped Supercapacitors Using Redox Additives of Polypyrrole and Hydroquinone

Ruiqiao Xu,Fengmei Guo,Xian Cui,Li Zhang,Kunlin Wang,Jinquan Wei

DOI: https://doi.org/10.1039/c5ta06165b

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A high performance fiber-shaped supercapacitor is fabricated from macroscopic CNT films by adding polypyrrole (PPy) to the electrodes and hydroquinone (HQ) to the electrolyte, simultaneously. HQ and PPy have synergistic effects on the supercapacitor.
Carbon Nanotube-Polypyrrole Core-Shell Sponge and Its Application As Highly Compressible Supercapacitor Electrode

Peixu Li,Enzheng Shi,Yanbing Yang,Yuanyuan Shang,Qingyu Peng,Shiting Wu,Jinquan Wei,Kunlin Wang,Hongwei Zhu,Quan Yuan,Anyuan Cao,Dehai Wu

DOI: https://doi.org/10.1007/s12274-013-0388-5

IF: 9.9

2013-01-01

Nano Research

Abstract:A carbon nanotube (CNT) sponge contains a three-dimensional conductive nanotube network, and can be used as a porous electrode for various energy devices. We present here a rational strategy to fabricate a unique CNT@polypyrrole (PPy) core-shell sponge, and demonstrate its application as a highly compressible supercapacitor electrode with high performance. A PPy layer with optimal thickness was coated uniformly on individual CNTs and inter-CNT contact points by electrochemical deposition and crosslinking of pyrrole monomers, resulting in a core-shell configuration. The PPy coating significantly improves specific capacitance of the CNT sponge to above 300 F/g, and simultaneously reinforces the porous structure to achieve better strength and fully elastic structural recovery after compression. The CNT@PPy sponge can sustain 1,000 compression cycles at a strain of 50% while maintaining a stable capacitance (> 90% of initial value). Our CNT@PPy core-shell sponges with a highly porous network structure may serve as compressible, robust electrodes for supercapacitors and many other energy devices.
High performance of stretchable carbon nanotube-polypyrrole fiber supercapacitors under dynamic deformation and temperature variation

Guo F. M.,Xu R. Q.,Cui X.,Zhang L.,Wang K. L.,Yao Y. W.,Wei J. Q.

DOI: https://doi.org/10.1039/c6ta02437h

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Flexible fiber-shaped supercapacitors have great potential in wearable electronic devices. Here, we fabricate CNT-PPy composite films by an electrochemical deposition method from macroscopic CNT films. The composite films are transformed into flexible fibers with ultralow density by drawing through several diamond wire-drawing dies. The CNT-PPy fibers have outstanding electrochemical properties with a high specific capacitance of 302 F g(-1) in 1 M H2SO4 liquid electrolyte. Flexible, stretchable, all-solid-state, fiber-shaped supercapacitors are then fabricated from the CNT-PPy fibers using H3PO4-poly(vinyl alcohol) as gel electrolyte. The supercapacitor has a high specific capacitance of 69 F g(-1), a high power density and an energy density of 3.8 kW kg(-1) and 3.6 W h kg(-1), respectively. The fiber-shaped supercapacitor also exhibits high stability and reliability under static and dynamic stretching, and also in a wide temperature range from -27 degrees C to 61 degrees C.
Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Huiyu Yang,Jie Xu,Lisha Zhai,Xin Liu,Bo Deng,Weilin Xu

DOI: https://doi.org/10.1007/s12221-021-0920-2

IF: 2.5

2021-04-26

Fibers and Polymers

Abstract:Polypyrrole (PPy) was deposited onto carbon fiber felt (CFF) by in-situ polymerization to prepare CFF/PPy composite textile as free-standing and flexible electrode for supercapacitor. Electrochemical performance was characterized by cyclic voltammetry (CV), electrochemical impedance (EIS) and constant current charge-discharge technology. The results show that the doping of organic sulfonic acid further improved the electrochemical performance of electrode materials. Areal capacitance, energy density and power density of the CFF/PPy/TsOH are as high as 5943 mF·cm−2, 1739 µWh·cm−2, 1450 µW·cm−2, respectively (at a current density of 0.8 mA·cm−2). Overall, this flexible textile electrode is promising to be used as wearable electronic device.

materials science, textiles,polymer science
Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Sanqing Huang,Dejin Bi,Yanfei Xia,Huijuan Lin

DOI: https://doi.org/10.1021/acsaem.2c03167

IF: 6.4

2023-01-01

ACS Applied Energy Materials

Abstract:Conducting polymer and carbon nanotube hybrids have been researched intensively in recent years for electrodes of fiber-shaped supercapacitors (FSSCs) toward flexible and wearable energy storage devices. Here, three-dimensional (3D) hierarchical polypyrrole (PPy)/carbon nanotube fiber (CNTF) architectures have been prepared by a facial electrodeposition method for flexible FSSC electrodes. PPy nanoparticles, vertically aligned nanowire arrays (VANAs), and nanowire networks were synthesized on CNTFs, respectively, to construct three types of 3D architectures by controlling the electrodeposition condition of PPy. The influence of the 3D architectures of PPy/ CNTF electrodes on the performance of the assembled quasi-solid-state FSSCs has been carefully studied. The FSSCs with PPy VANAs showed a much higher specific capacitance than that with PPy nanoparticles because the hierarchical porous structure of PPy VANAs provides a higher accessibility of electrolytic ions and a higher Coulombic efficiency than that with the PPy nanowire network. The PPy VANA-/CNTF-based FSSCs displayed high flexibility, stability, and a specific capacitance of 178.14 F g-1 at 0.4 A g-1, which is much higher than that based on common PPy cauliflower-like film/CNTF electrodes (92.06 F g-1) and pure CNTF electrodes (8.48 F g-1) under the same conditions, demonstrating the great advantages of the 3D hierarchical structure.
Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Tao Qian,Xi Zhou,Chenfei Yu,Shishan Wu,Jian Shen

DOI: https://doi.org/10.1039/c3ta13624h

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Highly dispersed polypyrrole (PPy) is firstly designed for decorating onto the surface of pristine multiwalled carbon nanotubes (CNTs), then used in the facile synthesis of a CNT/PPy core/shell composite, which provides a potential application for further modification as a base-material due to its high dispersibility. The hybrid material with a PPy shell thickness of 1.61 nm displayed a high specific capacitance of 276.3 F g−1 in 1 M KCl electrolyte, four times higher than pristine CNT. Such an improvement in performance is closely correlated with the integrated advantage of the decorated PPy shell, which enhanced the dispersibility and active surface area.
Defective Super-Long Carbon Nanotubes and Polypyrrole Composite for High-Performance Supercapacitor Electrodes

Yue Hu,Yang Zhao,Yan Li,Hui Li,Huibo Shao,Liangti Qu

DOI: https://doi.org/10.1016/j.electacta.2012.01.093

IF: 6.6

2012-01-01

Electrochimica Acta

Abstract:By use of super-long carbon nanotubes (CNTs) arrays as a platform for convenient fabrication of electrodes, we have demonstrated that electrochemical cyclic voltammetric (CV) scanning can be applied to effectively tailor the surface chemistry of CNTs and introduce physical defects into the CNT walls, which has drastically enhance the electrochemical capacitance performance of CNTs and their composites with conducting polymer of polypyrrole (PPy). The induced active sites along CNTs allow the coating of PPy on both the outer and inner walls of the defective CNTs. As a consequence, the highest capacitance of 587 Fg(-1) is achieved among all the tested samples, which is ten times higher than that of defect-free counterparts. The electrochemical CV pretreatment provides an effective approach to activate the CNT surfaces for enhancing their electrochemical performance meeting diverse demands, and offers a new pathway to design and fabricate high-performance capacitance devices. (C) 2012 Elsevier Ltd. All rights reserved.
Freestanding polypyrrole/carbon nanotube electrodes with high mass loading for robust flexible supercapacitors

Songjie Wang,Yongyin Liang,Wenchen Zhuo,Hang Lei,Muhammad Sufyan Javed,Botian Liu,Zilong Wang,Wenjie Mai

DOI: https://doi.org/10.1039/d0qm00649a

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:To meet the increasing requirement of flexible energy storage devices, it is critical to develop an electrode with commercial-level mass loading of active material for supercapacitors.

materials science, multidisciplinary,chemistry
Highly Flexible All-Solid-state Supercapacitors Based on Carbon Nanotube/polypyrrole Composite Films and Fibers

Yu Zhou,Xiaoyang Hu,Yuanyuan Shang,Chunfei Hua,Pingxin Song,Xinjian Li,Yingjiu Zhang,Anyuan Cao

DOI: https://doi.org/10.1039/c6ra07297f

IF: 4.036

2016-01-01

RSC Advances

Abstract:A film-shaped supercapacitor (2.5 cm2) showed good flexibility and high stability when undergoing bending and twisting.
Template‐free electrochemically polymerized polypyrrole nanowires and their application in flexible solid‐state supercapacitors

Ruyi Chen,Jiang Zhong,Huifang Zhu,Chunmi Tang,Yongluo Qiao,Changqing Fu,Jinglan Wang,Liang Shen,Haifeng He,Fei Gao

DOI: https://doi.org/10.1002/pi.6187

IF: 3.213

2021-02-09

Polymer International

Abstract:In this study, the treated carbon clothes with polypyrrole (PPy) nanowires (TCC@PPyW) were fabricated by template‐free electrochemical deposition of pyrrole in the presence of sodium citrate dihydrate and sodium perchlorate. The morphologies and electrochemical performances of the samples were studied by scanning electron microscopy, cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. The morphologies of PPy nanostructure were controlled by regulating interfacial pH, deposition time and concentration of sodium perchlorate. The PPy nanorods were generated with the aid of water oxidation when the pH of pyrrole solution was 7.9, and the PPy nanowires could be obtained by increasing the deposition time or the concentration of sodium perchlorate. The resulted PPy nanowires were about 100 nm in diameter and up to 600 nm in length. The TCC@PPyW electrodes provided rich contact area for electrolyte, which facilitated the rapid delivery of electric charge. As a result, the TCC@PPyW electrode exhibited a high areal specific capacitance of 841.2 mF/cm2 at 0.4 mA/cm2 and a high energy density of 420.6 μWh/cm2 at a power density of 0.2 mW/cm2. An all‐solid‐state flexible symmetric supercapacitor without any binder, incorporated with TCC@PPyW as electrodes and polyvinyl alcohol (PVA)‐LiCl gel as gel electrolyte was also reported. The TCC@PPyW supercapacitor displayed excellent flexibility and rate capability.This article is protected by copyright. All rights reserved.

polymer science
Ultrathin ZnS nanosheet/carbon nanotube hybrid electrode for high-performance flexible all-solid-state supercapacitor

Xiaoyi Hou,Tao Peng,Jinbing Cheng,Qiuhong Yu,Rongjie Luo,Yang Lu,Xianming Liu,Jang-Kyo Kim,Jun He,Yongsong Luo

DOI: https://doi.org/10.1007/s12274-017-1459-9

IF: 9.9

2017-03-27

Nano Research

Abstract:Flexible and easily reconfigurable supercapacitors show great promise for application in wearable electronics. In this study, multiwall C nanotubes (CNTs) decorated with hierarchical ultrathin zinc sulfide (ZnS) nanosheets (ZnS@CNT) are synthesized via a facile method. The resulting ZnS@CNT electrode, which delivers a high specific capacitance of 347.3 F·g–1 and an excellent cycling stability, can function as a high-performance electrode for a flexible all-solid-state supercapacitor using a polymer gel electrolyte. Our device exhibits a remarkable specific capacitance of 159.6 F·g–1, a high energy density of 22.3 W·h·kg–1, and a power density of 5 kW·kg–1. It also has high electrochemical performance even under bending or twisting. The all-solid-state supercapacitors can be easily integrated in series to power different commercial light-emitting diodes without an external bias voltage.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Triaxial Carbon Nanotube/Conducting Polymer Wet-Spun Fibers Supercapacitors for Wearable Electronics

Azadeh Mirabedini,Zan Lu,Saber Mostafavian,Javad Foroughi

DOI: https://doi.org/10.3390/nano11010003

IF: 5.3

2020-12-22

Nanomaterials

Abstract:The ubiquity of wearables, coupled with the increasing demand for power, presents a unique opportunity for nanostructured fiber-based mobile energy storage systems. When designing wearable electronic textiles, there is a need for mechanically flexible, low-cost and light-weight components. To meet this demand, we have developed an all-in-one fiber supercapacitor with a total thickness of less than 100 μm using a novel facile coaxial wet-spinning approach followed by a fiber wrapping step. The formed triaxial fiber nanostructure consisted of an inner poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) core coated with an ionically conducting chitosan sheath, subsequently wrapped with a carbon nanotube (CNT) fiber. The resulting supercapacitor is highly flexible, delivers a maximum energy density 5.83 Wh kg−1 and an extremely high power of 1399 W kg−1 along with remarkable cyclic stability and specific capacitance. This asymmetric all-in-one fiber supercapacitor may pave the way to a future generation of wearable energy storage devices.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Deposition of ZIF-67 and Polypyrrole on Current Collector Knitted from Carbon Nanotube-Wrapped Polymer Yarns As a High-Performance Electrode for Flexible Supercapacitors.

Yunxia Liang,Xiaogang Luo,Zexu Hu,Lijun Yang,Yang Zhang,Liping Zhu,Meifang Zhu

DOI: https://doi.org/10.1016/j.jcis.2022.10.155

IF: 9.9

2022-01-01

Journal of Colloid and Interface Science

Abstract:Polymeric fiber fabrics with inherent mechanical flexibility, lightweight and porous textile structure are highly attractive as an ideal substrate for building flexible electrodes. However, their insulating nature limits their direct application as current collector. Here, we designed and fabricated a flexible conductive fabric from polymer yarns. This was achieved through wrapping polymer yarns with a carbon nanotube (CNT) cylinder, which was continuously prepared from a floating catalyst chemical vapor deposition process, and a subsequent knitting process. The derived CNT-wrapped polymer yarn fabric (CPYF) could directly serve as current collector/substrate to load zeolitic imidazolate framework-67 (ZIF-67) and polypyrrole (PPy) through in-situ growth and chemical polymerization. The resultant CPYF-ZIF-67-PPy displayed a maximum areal capacitance of 2308.8 mF cm' at 0.5 mA cmz. Moreover, the assembled supercapacitor achieved a maximum areal energy density of 112 lW h cm-2 at the power density of 201.5 lW cmz. Meanwhile, the device demonstrated an extraordinary flexibility with stable electrochemical properties after 5000 cycles of bending and 1000 cycles of stretching. This work therefore offers a new strategy that can be used to develop flexible conductive fabric for flexible supercapacitors.(c) 2022 Elsevier Inc. All rights reserved.

Highly Conductive, Twistable and Bendable Polypyrrole–carbon Nanotube Fiber for Efficient Supercapacitor Electrodes

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Flexible, Weavable And Efficient Microsupercapacitor Wires Based On Polyaniline Composite Fibers Incorporated With Aligned Carbon Nanotubes

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Textile Electrodes Woven by Carbon Nanotube-Graphene Hybrid Fibers for Flexible Electrochemical Capacitors.

Carbon nanotube-based electrodes for flexible supercapacitors

Nanostructured conductive polypyrrole hydrogels as high-performance, flexible supercapacitor electrodes

High Performance Carbon Nanotube Based Fiber-Shaped Supercapacitors Using Redox Additives of Polypyrrole and Hydroquinone

Carbon Nanotube-Polypyrrole Core-Shell Sponge and Its Application As Highly Compressible Supercapacitor Electrode

High performance of stretchable carbon nanotube-polypyrrole fiber supercapacitors under dynamic deformation and temperature variation

Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Defective Super-Long Carbon Nanotubes and Polypyrrole Composite for High-Performance Supercapacitor Electrodes

Freestanding polypyrrole/carbon nanotube electrodes with high mass loading for robust flexible supercapacitors

Highly Flexible All-Solid-state Supercapacitors Based on Carbon Nanotube/polypyrrole Composite Films and Fibers

Template‐free electrochemically polymerized polypyrrole nanowires and their application in flexible solid‐state supercapacitors

Ultrathin ZnS nanosheet/carbon nanotube hybrid electrode for high-performance flexible all-solid-state supercapacitor

Triaxial Carbon Nanotube/Conducting Polymer Wet-Spun Fibers Supercapacitors for Wearable Electronics

Deposition of ZIF-67 and Polypyrrole on Current Collector Knitted from Carbon Nanotube-Wrapped Polymer Yarns As a High-Performance Electrode for Flexible Supercapacitors.