Abstract:By employing a carbon nanotube (CNT) sponge with a 3D porous network as a compressible substrate and NiCo2S4 nanoparticles as active materials, a NiCo2S4/CNT sponge electrode with high compression characteristics and prominent capacitance is fabricated by a solvothermal method. NiCo2S4 nanoparticles with size ranging from 20 to 25 nm are evenly anchored on the network of a CNT sponge, making it show excellent compression performance and large specific capacitance of 1110 F g–1. Meanwhile, a Fe2O3/CNT sponge as an anode with a specific capacitance of 330 F g–1 for a widening voltage window is also fabricated by hydrothermal reaction technology. A NiCo2S4/CNT//Fe2O3/CNT asymmetric supercapacitor with high compression is assembled using a NiCo2S4/CNT sponge and an Fe2O3/CNT sponge as the cathode and anode electrode, respectively, and its potential window can reach up to 1.7 V. The assembled device not only delivers a high specific capacitance of 117 F g–1 at 1 A g–1, but also shows excellent compression and flexibility. Moreover, it exhibits a superior energy density of 41.6 W h kg–1 and excellent long-run cyclic stability that retains about 82% of the initial capacitance after 5000 cycles under about 80% strain. The NiCo2S4/CNT//Fe2O3/CNT asymmetric supercapacitor may offer a feasible approach for assembling compressible energy devices on account of its remarkable compression property, superior specific capacitance, and distinguished Coulombic efficiency.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c03745?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c03745</a>.Experimental section; XRD patterns of NiCo2S4 nanoparticles and NiCo2S4/CNT-33 sponge; SEM images of NiCo2S4/CNT sponge electrodes obtained by solvothermal treating in different concentrations of Ni(NO3)2·6H2O·6H2O with a molar ratio of Co:Ni = 2 for 10 h at 180 °C: (a) pure CNT, (b) NiCo2S4/CNT-8.3, (c) NiCo2S4/CNT-17, (d) NiCo2S4/CNT-33, (e) NiCo2S4/CNT-50, and (f) NiCo2S4/CNT-67; electrochemical properties of NiCo2S4/CNT sponge electrodes obtained by solvothermal treating in different concentrations with a molar ratio of Co:Ni = 2 for 10 h at 180 °C in 3 M KOH: (a) CV curves, (b) GCD curves, (c) Nyquist plot over the frequency range of 100 kHz to 0.1 Hz, and (d) specific capacitance at different current densities; NiCo2S4/CNT-33 sponge electrode corresponding b-value found by using the peak current relationship to the scan rate; specific capacitance of the NiCo2S4/CNT-33 sponge at each evaluated current density for different set strains; and compressive stress–strain curves of the asymmetric supercapacitor at different strains (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c03745/suppl_file/ef0c03745_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Carbon Nanotube-Polypyrrole Core-Shell Sponge and Its Application As Highly Compressible Supercapacitor Electrode

Inlaying ZIF-derived Co3S4 Hollow Nanocages on Intertwined Polypyrrole Tubes Conductive Networks for High-Performance Supercapacitors

Core-Double-Shell, Carbon Nanotube@Polypyrrole@MnO2 Sponge As Freestanding, Compressible Supercapacitor Electrode

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

In-situ synthesis of carbon nanotube/graphene composite sponge and its application as compressible supercapacitor electrode

Carbon nanotube sponges as conductive networks for supercapacitor devices

Highly Deformation-Tolerant Carbon Nanotube Sponges As Supercapacitor Electrodes

Preparation of three-dimensional compressible MnO2@carbon nanotube sponges with enhanced supercapacitor performance

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Highly compressible 3-D hierarchical porous carbon nanotube/metal organic framework/polyaniline hybrid sponges supercapacitors

Fabrication of Carbon Nanotubes/Polypyrrole/Carbon Nanotubes/Melamine Foam for Supercapacitor

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

High-performance Flexible Supercapacitor Enabled by Polypyrrole-coated NiCoP@CNT Electrode for Wearable Devices.

3D Hierarchical NiCo 2 S 4 Nanoparticles/Carbon Nanotube Sponge Cathode for Highly Compressible Asymmetric Supercapacitors

Rational Design of High-Surface-area Carbon Nanotube/microporous Carbon Core-Shell Nanocomposites for Supercapacitor Electrodes.

Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Phosphorus-doped Ni-Co Sulfides Connected by Carbon Nanotubes for Flexible Hybrid Supercapacitor

All-solid State Symmetric Supercapacitors Based on Compressible and Flexible Free-Standing 3D Carbon Nanotubes (Cnts)/poly(3,4-Ethylenedioxythiophene) (PEDOT) Sponge Electrodes

High-performance Nanostructured Supercapacitors on a Sponge.

Preparation of a Three-Dimensional Ordered Macroporous Carbon Nanotube/Polypyrrole Composite for Supercapacitors and Diffusion Modeling