Abstract:Although nanocarbon-based nanofillers have been widely used to improve the energy-storing and sensing functions of porous materials, the comparison of the effects of different nanocarbon-based fillers on the capacitive and flexible sensing properties of nanocarbon-based porous sponge composite supercapacitor electrodes by combining a carbon nanotube, graphene, and graphene oxide with porous sponge is incomplete. The specific capacitance of carbon nanotube-based electrodes is 20.1 F/g. The specific capacitance of graphene-based electrodes is 26.7 F/g. The specific capacitance of graphene oxide-based electrodes is 78.1 F/g, and the capacity retention rate is 92.99% under 20 000 charge–discharge cycles. Under a bending load of 180°, the capacitance retention rate of graphene oxide sponge composite electrodes is 67.46%, which indicates that the prepared electrodes of supercapacitor have the advantages of high capacitance and good flexibility at the same time. To demonstrate their performance, an array of three graphene oxide supercapacitors in series was constructed, which could light up a red light-emitting diode (LED). The tensile strength of carbon nanotube sponge composite electrodes is 0.267 MPa, and the tensile linearity is 0.0169. The experimental results show that graphene oxide-based sponge composite supercapacitor electrodes have the best capacitance performance and carbon nanotube sponge composites have the most potential as a flexible sensor.This article has not yet been cited by other publications.

In-situ synthesis of carbon nanotube/graphene composite sponge and its application as compressible supercapacitor electrode

Carbon Nanotube-Polypyrrole Core-Shell Sponge and Its Application As Highly Compressible Supercapacitor Electrode

Carbon nanotube sponges as conductive networks for supercapacitor devices

Fabrication of Carbon Nanotubes/Polypyrrole/Carbon Nanotubes/Melamine Foam for Supercapacitor

Multifunctional Graphene-Based Composite Sponge

Carbon Nanotube Spaced Graphene Aerogels with Enhanced Capacitance in Aqueous and Ionic Liquid Electrolytes

In-situ synthesis of flexible nanocellulose/carbon nanotube/polypyrrole hydrogels for high-performance solid-state supercapacitors

Supramolecular Assembly of 1D Pristine Carbon Nanotubes and 2D Graphene Oxides into Macroscopic All-Carbon Hybrid Sponges for High-Energy-Density Supercapacitors

Comparative Study of Nanocarbon-Based Flexible Multifunctional Composite Electrodes

Synthesis of Nitrogen-Doped Porous Carbon Nanofibers As an Efficient Electrode Material for Supercapacitors.

Highly Deformation-Tolerant Carbon Nanotube Sponges As Supercapacitor Electrodes

Single-walled carbon nanotube embedded porous carbon nanofiber with enhanced electrochemical capacitive performance

Melamine sponge modified by graphene/polypyrrole as highly compressible supercapacitor electrodes

Synthesis of polypyrrole/nitrogen-doped porous carbon matrix composite as the electrode material for supercapacitors

Fabrication of High-Performance Flexible Supercapacitor Electrodes with Poly(3,4-ethylenedioxythiophene) (PEDOT) Grown on Carbon-Deposited Polyurethane Sponge

Facile Synthesis of NiCo2S4/CNTs Nanocomposites for High-Performance Supercapacitors.

Mesoporous carbon nanofiber engineered for improved supercapacitor performance

Multifunctional, durable and highly conductive graphene/sponge nanocomposites

Core-Double-Shell, Carbon Nanotube@Polypyrrole@MnO2 Sponge As Freestanding, Compressible Supercapacitor Electrode

Multiwalled Carbon Nanotubes/Polypyrrole/Graphene/Nonwoven Fabric Composites Used As Electrodes of Electrochemical Capacitor

Facile synthesis of graphene sheets intercalated by carbon spheres for high-performance supercapacitor electrodes