Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

3D large deformation FE analysis of spudcan foundations on layered clays using CEL approach

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

BEM-ALEM Modeling of Plate–Soil Interaction for Rigid Circular Foundation in Layered Saturated Soils Subjected to Mechanical or Thermal Load

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Effect of Large Deformation Analysis for Site Investigation Tool - CPT in Layered Soils

Undrained Bearing Capacity of Spudcan under Combined Loading

Estimation of spudcan penetration in variable sand deposits with the Arbitrary Lagrangian Eulerian Finite Element Method

Method Evaluating Axial Response of Vertically-Loaded Piles During Spudcan Penetration

3D FEM ANALYSIS ON DEFORMATION OF PERPENDICULARLY CROSSING BURIED PIPELINE IN PIPE JACKING

A DEM Study on Bearing Behavior of Floating Geosynthetic-Encased Stone Column in Deep Soft Clays

Effects of spudcan installation processes on the bearing capacity of foundations under combined loading in soft-over-stiff clay

Case study of spudcan punch-through in layered soil with interbedded thin stiff clay

Finite Element Analysis of Compacting Displacements of Single Jacked Pile