Abstract:Post-combustion carbon capture is one of the feasible methods to reduce emission of carbon dioxide (CO2) from coal-fired power plants. The biggest challenge in this technology is reduction of energy consumption. This work proposes a hollow fiber based rapid temperature swing adsorption (RTSA) method for capturing CO2 from typical coal-fired power plants. The proposed RTSA approach can shorten the operating time and using low-grade energy for regeneration of adsorption elements. In this study, the tank-in-series model is used to simulate the RTSA process including adsorption and desorption periods. A dual-column operating procedure is then used to treat the flue gas continuously from the coal-fired power plants. Main operating variables including inlet gas volume flow rate (0.1 – 0.2 m3/s), abandon time (0 – 10 s), desorption temperature (80 - 120 °C) on key performance factors such as discharge gas purity, capture ratio of CO2, and energy consumption per unit CO2, etc. are investigated for reducing the energy consumption. This study found that the inlet gas volume flow rate will significantly affect the capture ratio, where smaller gas volume flow rate would be beneficial to increase capture ratio. The abandon time obviously affects the purity of the captured CO2, where the longer abandon time leads to higher purity. Desorption temperature affects both the capture ratio and purity of captured CO2. The higher the desorption temperature, the greater the purity and capture ratio. For one typical basic unit with dual-column hollow fibers, the study found that when the inlet gas volume flow rate is 0.12 m3/s, the desorption waiting time is 7 s, and the desorption temperature is 120 °C, both the CO2 purity and capture ratio can exceed 90 %. With considering the possibility of using steam in a low-pressure turbine as a source of heat required for Dual column vacuum RTSA (DC-vRTSA), the impact on the efficiency and stream data of typical coal-fired power plants are calculated. DC-vRTSA at 120°C, 100°C and 80°C will reduce the efficiency of coal-fired power plants by 8.2%, 6%, and 3.4%, respectively.

A Preliminary Investigation Of Cryogenic Co2 Capture Utilizing A Reverse Brayton Cycle

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Performance Analysis and Comparison of Cryogenic CO2 Capture System

Unveiling the Potential of Cryogenic Post-Combustion Carbon Capture: From Fundamentals to Innovative Processes

Thermodynamic analysis of low-temperature carbon dioxide and sulfur dioxide capture from coal-burning power plants

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Experiment investigation on carbon dioxide capture by cryogenic desublimation

Co2 Capture from Flue Gas in an Existing Coal-Fired Power Plant by Two Successive Pilot-Scale Vpsa Units

Cryogenic technology progress for CO2 capture under carbon neutrality goals: A review

Performance Analysis of Coal-Fired Power Plants Integrated with Carbon Capture System under Load-Cycling Operation Conditions

Transient Model of Carbon Dioxide Desublimation in Plate-Fin Heat Exchanger of Cryogenic Reverse Brayton Refrigerator

Hollow fiber-based rapid temperature swing adsorption process for carbon capture from coal-fired power plants

Process and Integration Optimization of Post-Combustion CO2 Capture System in a Coal Power Plant

Performance Investigation and Precooler Design of a Coupled Supercritical CO2-based Mixture Brayton Cycle with Absorption Refrigeration Cycle

Review of Cryogenic Carbon Capture Innovations and Their Potential Applications

Opportunities for Decarbonizing Existing U.S. Coal-Fired Power Plants via CO2 Capture, Utilization and Storage

Performance investigation and precooler design of a coupled supercritical CO 2 -based mixture Brayton cycle with absorption refrigeration cycle

Thermo-economic Analysis and Multi-Objective Optimization of Cryogenic CO2 Capture Systems Based on Liquefied Natural Gas Cold Energy Utilization

Preliminary Analysis of Direct and Indirect Heat Rejection Systems for a Small Sco2 Brayton Cycle Using an Existing Natural Draft Dry Cooling Tower

An Integrated Solution of Energy Storage and CO2 Reduction: Trans-critical CO2 Energy Storage System Combining Carbon Capture with LNG Cold Energy

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications