Abstract:The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the individual phases on the magnetic performance at different temperatures. Here, we explore this mechanism effect for three different Sm(Co,Fe,Cu,Zr)$_z$ alloys by deploying high-resolution magnetic imaging via in-situ transmission electron microscopy and three-dimensional chemical analysis using atom probe tomography. We show that their microstructures differ in terms of SmCo$_5$ cell-wall and Z-phase size and density, as well as the Cu concentration in the cell walls, and demonstrate how these features influence the magnetic domain size and density and thus form different magnetic textures. Moreover, we illustrate that the dominant coercivity mechanism at room temperature is domain-wall pinning and show that magnets with a denser cell-wall network, a steeper Cu gradient across the cell-wall boundary, and thinner Z-phase platelets have a higher coercivity. We also show that the coercivity mechanism at high temperatures is domain-wall nucleation at the cell walls. Increasing the Cu concentration inside the cell walls decreases the transition temperature between pinning and nucleation, significantly decreasing the coercivity with increasing temperature. We therefore provide a detailed explanation of how the microstructure on the atomic to nanoscale directly affects the magnetic performance and provide detailed guidelines for an improved design of Sm(Co,Fe,Cu,Zr)$_z$ magnets.

Microstructure and magnetic properties of rapidly solidified Sm(CobalFe0.1Cu0.10Zrx)(7) alloys

Microstructure and Magnetic Properties of Rapidly Quenched Sm2(Fe,Al,Zr)17C1.5 Ribbons with Zr Additions

Studies on the structure and magnetic properties of Sm2(Fe,Al)17CY alloys with Zr additions

Formation, Structure and Magnetic Hardening of Zr Added Sm2(Fe,Al,Zr)17C1.5 Compounds

Microstructure and magnetic properties of melt-spun Sm(Co0.58Fe0.31Cu0.04Zr0.05B0.02)z ribbons

Structural and Magnetic Evolution of Rapidly Quenched Sm-Fe-Si-C Alloys

Microstructure and magnetic properties of Sm-Co-based amorphous nanocrystals controlled by B addition

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Nanocrystalline Fe(Co)ZrMoBCu soft magnetic alloys: A transmission electron microscopy study of the microstructures

Influence of Mo Addition on the Microstructure and Magnetic Properties of Sm2(Fe, Al, Mo)17C1.5 Alloys

Effects of rare-earth yttrium on crystallization and magnetic properties of Fe71 .4Si13B9.6Mo2Cr1Cu1P2nanocrystalline alloy

Effects of Sm Content on the Phase Structure, Microstructure and Magnetic Properties of the Sm Zr0.2(Fe0·8Co0.2)11.5Ti0.5 (x=0.8–1.4) Alloys

Microstructure and magnetic properties of Sm3Co11−xFexB4 ribbons with superior coercivity

The Microstructure and Magnetization Behaviors of (pr8.2fe86.1−xcoxb5.7)0.99zr0.01 (x = 0–10) Nanocomposite Magnets

High-Coercivity Sm-2(Fe,Al,Mo)(17)C-1.5 Ribbons With Addition Of Mo

Effect of melt-spinning speed on the microstructure and magnetic properties of Al–Cu–Fe alloy-doped SmCo5 ribbons

Phase separation and chemistry evolution in Fe-rich Sm(CobalFe0.31Cu0.07Zr0.025)7.7 magnets: The effect of initial defect

Formation of cellular/lamellar nanostructure in Sm$_2$Co$_{17}$-type binary and ternary Sm-Co-Zr magnets

Temperature dependence of magnetization processes in Sm(Co,Fe,Cu,Zr)$_z$ magnets with different nanoscale microstructures

Effects of Nb and Zr additions on crystallization behavior, microstructure and magnetic properties of melt-spun (Nd,Pr)2Fe14B/α-Fe alloys

Effect of Cu substitution on structure and magnetic properties of anisotropic SmCo ribbons