Abstract:A non-contact testing and characterization method based on air-coupled acoustic excitation and interferometric displacement measurements of micro-scale MEMS structures at room conditions is introduced. In demonstrating its potential uses in testing and characterization, the present non-contact approach is applied to (i) micro-cantilever beams and (ii) rotational disk oscillators. Air-coupled multi-mode excitation of micromechanical cantilever-type oscillators under a pulsed acoustic field generated by an air-coupled transducer is demonstrated and reported. Also, the testing and characterization of a micro-scale rotational disk oscillator developed for a new class of sensor platform is demonstrated. The main design objective of the rotational disk oscillator class is to overcome the out-of-plane motion related sensitivity limitations of the cantilever-based sensors at high frequency operations. The dynamics of the rotational disk oscillators is more complex than micro-cantilever beams due to its in-plane motion in addition to its various out-of-plane modes of vibration. The fabrication of a rotational disk oscillator requires a suspended disk whose underside is visibly inaccessible due to a narrow micro-gap. In addition to the dynamic characterization of the cantilever beams and rotational disk oscillators, the current investigation demonstrates that the presented approach can address unique structural concerns such as the verification of a gap separation of the rotational oscillator from the underlying silicon substrate. Utilizing the proposed technique, the resonant frequencies of the oscillator structures are obtained and its potential uses in the testing and characterization of micro-scale structures are discussed. The major specific advantages of the introduced approach include that (i) its noncontact nature can eliminate testing problems associated with stiction and adhesion, and (ii) it allows direct mechanical characterization and testing of components and sub-components of a micro-scale devices.

Individual Excitation of Closely Spaced Modes Using Sine Testing Techniques for Structural Qualification

Sine-On-Random Vibration Test Based On Multi-Resolution Spectrum Estimation And Wiener-Khinchin Theorem

Control Strategy for Multi-Exciter Random Vibration Test

Application of force limited control in vibration test

Experimental Methods for Seismic Simulation of Structural Columns: State-of-the-Art Review and Introduction of New Multiuse Structural Testing System

Non-Contact Mechanical Testing and Characterization of Micro-Scale Structures

Modal Parameter Identification of Structure under Base Excitation Using Vibration Test Data

Quasi-static testing based structural modal parameter estimation

Testing Structural Elements under Multiaxial Loading: A Numerical Model of the Bench to Understand and Predict Complex Boundary Conditions

Test Verification for Improved Design of Rotor Blade by ESPI

Optimal Configuration of Shakers for Phase Resonance Testing Using Modal Parameters

Multi-Order Mode Excitation and Separation of Ultrasonic Guided Waves in Rod Structures Using 2D-FFT

A New Way to Define Closely Spaced Modes of Vibration

Virtual Testing for Advanced Aerospace Composites: Advances and Future Needs

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

In-plane selective excitation of arbitrary vibration modes using thickness-shear (d15) piezoelectric transducers

Acoustic testing techniques for replicating in-flight dynamic loads

Development and testing of a novel vibratory compaction instrument considering its natural frequency

Experimental investigations on normal mode nodes as support positions of a resonant testing facility for bending fatigue tests

Boundary constrained modal test method for large scale highly flexible structures

Modeling and estimation of focused ultrasound radiation force for modal excitation