Abstract:Vehicles commonly suffer from the narrow-band noises and vibrations, usually a superposition of multiple sinusoidal signals, due to the excitations of engines, electrical motors, gear boxes, and other rotating mechanical parts. These excitations are transmitted to a reference point of some structure with certain transmission paths. The vibration signal measured at the reference point can be used for power system monitoring, fault diagnosis, modal analysis, noise analysis, etc. For convenience, researchers in a laboratory usually use shakers to generate expected narrow-band vibration signals acting on the vehicle structure reference points to simulate the vibration signals. However, there is a prominent difficulty in ensuring the amplitude and phase accuracy of each sub-frequency component simultaneously. In order to improve the accuracy of generating the expected vibration signal, this paper presents a multi-source vibration simulation control technology based on the tracking filter method. The main idea is to use the tracking filter to estimate the amplitude and phase of the target sub-frequency component accurately. Further, on the target sub-frequency, the drive signal of shakers is then corrected based on the amplitude and phase errors to achieve a more accurate target vibration signal. The amplitude and phase of each sub-frequency component in the excitation signal can be controlled independently. Compared with other Fast Fourier Transform (FFT)-based frequency domain analysis algorithms and numerical methods by solving the equations, the tracking filter method has a higher frequency resolution and higher accuracy. It can be easily realized in real time applications due to its simplicity. Finally, verification experiments are completed. The experimental results show that the multi-source vibration simulation control technology presented in this paper can achieve high-precision amplitude and phase on each sub-frequency component of the target vibration signals, which contain up to eight sub-frequency components.

Application of force limited control in vibration test

Control Strategy for Multi-Exciter Random Vibration Test

Sine-On-Random Vibration Test Based On Multi-Resolution Spectrum Estimation And Wiener-Khinchin Theorem

Analysis of a vibration overtest problem and a force-limited control vibration test

Research On Control Technologies For A High-Precision Multi-Source Vibration Simulation System

Control strategy in earthquake simulation test based on elastic payload

Design and Implementation of Vibration Test Control System of Multi-Exciter Synchronization

Study on Control Method and System of Multi-Shaker Random Vibration Test

Analysis of Model Simplification Method in Force Limited Vibration Testing

Earthquake simulation control of a specimen in elastoplastic stage

The research of force limited input in vibration testing of the payload and the launch vehicle

Optimal Force-Balance Control of Closed-Loop Sensing Systems with Time Delay

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Satellite Vibration Environment Test:Acceleration Control and Over-test

Optimal Bounded Control of Large Random Vibration Responses in Nonlinear Systems

Highly dynamic force control for experimental vibration analysis with an electrodynamic shaker

Prediction Technique and Measuring Device for Coupled Disturbance Forces from Large Equipment in the Spacecraft

Finite-time adaptive control for microgravity vibration isolation system with full-state constraints

Modal Parameter Identification of Structure under Base Excitation Using Vibration Test Data

Evaluation of Control Accuracy for a Boundary-Coordinating Device in a Real-Time Hybrid Test

Vision-aided nonlinear control framework for shake table tests