Abstract:In the active flight phase, the spacecraft suffers the rigorous external vibration environment which comes from the engine at the bottom of rocket. In course of the ground test, the shaker simulates such excitation through the base movement, and the modal parameters identification method which employs the vibration test data is to the more extent in line with the operating state. In this paper, a specified method is applied for parameter estimation of lumped-mass mechanical system in the vibration test. The modal parameters under the fixed and free–free constrained state can be identified at the same time by this technique. In addition, when the analytical model which includes the test article and the shaking table is adopted, the relations between the response transfer function (RTF) and frequency response function (FRF) are clarified, and some misconceptions in the engineering practice are cleared. Because of the uncertain of the connection impedance between the test article and the shaking table, only the partial parameters of the fixed mode can be identified, such as natural frequency, modal damping ratio and modal shape. As the interface force transfer function (IFTF) can eliminate the influence of the connection impedance and the fixed impedance matrix of the test piece is transformed into the free impedance matrix, the identified parameters of the free mode are complete. Furthermore, the influence of the constraint degree of freedom (DOF) on the parameter identification of the IFTF is discussed preliminarily. Finally, the numerical simulation and the vibration test of discrete structure verify the validity of the proposed method.

Optimal Configuration of Shakers for Phase Resonance Testing Using Modal Parameters

A Novel Three-Parameter Tuning Method For Seismic Simulation Shaking Table

Study on Control Method and System of Multi-Shaker Random Vibration Test

Control Strategy for Multi-Exciter Random Vibration Test

Application of force limited control in vibration test

Optimum Control Strategy Study for Multi-exciter Sine Test Control System

Control Designs for Multi-Exciter Power Spectral Density Replication Vibration Tests

Modal Parameter Identification of Structure under Base Excitation Using Vibration Test Data

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Nonlinear damping quantification from phase-resonant tests under base excitation

Modal Parameter Discrimination of Structural Mode based on Vibration Test

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

MODAL PARAMETER IDENTIFICATION OF EXPERIMENTAL DATA BASED ON DYNAMIC ENVIRONMENT

Quasi-static testing based structural modal parameter estimation

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression

Optimal Modal Assignment and Simulation of Vibration System

Modal Parameter Identification Based on Multi-Axis Vibration Environment Test

Study on resonance of multi-degree-of-freedom structure based on modal orthogonal basis

Design and Experiment of a Multi-DOF Shaker Based on Rotationally Symmetric Stewart Platforms with an Insensitive Condition Number

Optimum Parameters for Large Mass Ratio TMDs Using Frequency Response Function