Abstract:In this paper, the electrochemical corrosion behavior and microscopic mechanism of elemental sulfur adsorption were studied by combining experiment and theory, and the grain boundary corrosion mechanism of sulfur was analyzed to provide theoretical guidance for the development of sulfur corrosion-resistant materials and alloy design. First, the sulfur-resistant casing steel P110SS was annealed at 950 °C, and electron backscatter diffraction was taken to characterize the microscopic morphology and electrochemical methods to test the grain boundary corrosion. The results show that the average grain diameter of P110SS steel increases from 1.9 to 5.8 μm, and the maximum grain diameter increases to 29 μm. The grain size increases obviously, the grain orientation is clear, and the Σ3 n grain boundary ratio decreases significantly. Electrochemical polarization curves and AC impedance spectroscopy analysis showed that the corrosion rate on the surface of P110SS increased after heat treatment. At the same time, the surface model of the common special grain boundary in iron is established, and the rationality of its grain boundary structure is analyzed. Then, multiple adsorption sites at the grain boundary are calculated, and the optimal adsorption sites are the B1 position of Σ3, the B2 position of Σ5 and the H2 position of Σ9. By means of adsorption energy size, charge density, and electron state density, the existence of strong bond cooperation between S atoms and Fe atoms is analyzed, and the corrosion resistance of the grain boundary decreases with the increase in Σ value. In addition, Mo and Ni are easily concentrated in Σ3 and Σ9 and can reduce the surface activity of grain boundaries, thus improving the resistance to sulfur corrosion of grain boundaries.

Corrosion of Mild Steel in the Presence of Elemental Sulfur

Elemental sulfur corrosion of mild steel at high concentrations of sodium chloride

The corrosion behaviour of sulphur on the carbon steel used in oil & gas field with high concentration of H2S

First-Principles Study of Sulfur Corrosion Mechanism at Carbon Steel Grain Boundaries

Atmospheric Corrosion of Steel A3 Deposited with Ammonium Sulfate and in the Presence of Sulfur Dioxide

Real-Time Observation of High-Temperature Gas Corrosion in Dry and Wet SO2-Containing Atmosphere

A New Updated Model of CO2/H2S Corrosion in Multiphase Flow

Effect of H2S on CO2 Corrosion of Mild Steel in High Temperature Supercritical CO2 Condition

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Corrosion Behavior of X52 Anti-H2S Pipeline Steel Exposed to High H2S Concentration Solutions at 90 °C

Sulfide Corrosion Cracking of Linepipe for Sour Gas Service

Corrosion-Mechanical Properties and Susceptibility to Hydrogenetaion of Pipe Steel in the Presence of Carbon Dioxide Gas and Hydrogen Sulphide in Environment

Corrosion of Carbon Steel in a Tropical Marine Environment Enhanced by H2S from Sargassum Seaweed Decomposition

A Thermodynamic Model for the Prediction of Mild Steel Corrosion Products in an Aqueous Hydrogen Sulfide Environment

Effect of Temperature and H<sub>2</sub>S Concentration on Corrosion of X52 Pipeline Steel in Acidic Solutions

Microbial corrosion behavior of pipeline steels in simulation environment of natural gas transportation pipeline

Insight into sulfate-reducing bacteria corrosion behavior of X80 pipeline steel welded joint in a soil solution

Methanogenic Archaea and Sulfate Reducing Bacteria Induce Severe Corrosion of Steel Pipelines after Hydrostatic Testing

Impact of Prolonged Exposure to Sour Service on the Mechanical Properties and Corrosion Mechanism of NACE Carbon Steel Material Used in Wet Sour Gas Multiphase Pipeline

Effects of Sodium Chloride Concentration on Mild Steel Corrosion in Slightly Sour Environments

A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium