Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Estimation Of Loss Coefficient For T-Junction By An Entropy Production Approach

Numerical Simulation of Tunnel Flow with a Concave-Convex Boundary

ESTIMATION OF THE LOSS COEFFICIENT FOR CONDUIT BENDS WITH CIRCULAR CROSS SECTION BY THE SECOND LAW APPROACH

Steam-side Irreversible Loss Analysis of Spirally Corrugated Tube

An Experimental Study Of Compressible Combining Flow At 45 Degrees T-Junctions

Determination of Loss Coefficients for High-Temperature Flow Devices: an Entropy-Based Approach

Local Energy Loss at Junction of Pressurized Pipes with Rectangular Cross Section

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Improving Combined Flow and Thermal Network Accuracy for Radially Air-Cooled Generators by Considering the Nonlinear Resistance Characteristics of T-Junction Flow

Experimental investigation on pressure loss of compressible combining flow at 45°T-junctions

Determination of Loss Coefficients for Micro-Flow Devices: A Method Based on the Second Law Analysis (SLA)

Study on a New Pressure Loss Model of T-junction for Compressible Flow with Particle Image Velocimetry Test

Experimental study on local flow resistance at junctions of circular pipes

Energy Analysis of Francis Turbine for Various Mass Flow Rate Conditions Based on Entropy Production Theory

Entropy Transportation Equation Based Loss Mechanism Analysis with High Fidelity Turbulence Simulation Results

Experiment Research on Thermal Mixing in Horizontal T-Junction: In-Pipe Temperature and Flow Characteristic Research

Application of Entropy Production Theory to Hydro-Turbine Hydraulic Analysis

Investigations of the Thermodynamic Entropy Evaluation in a Hydraulic Turbine under Various Operating Conditions

Local energy loss at right-angle junction of circular pipes

Investigation on Hydraulic Loss Component and Distribution in Hydraulic Machinery: A Case Study of Pump-Turbine in Pump Mode

Analysis and Judgment of the Local Loss Based on the Entropy Gradient