Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Determination of Loss Coefficients for High-Temperature Flow Devices: an Entropy-Based Approach

Steam-side Irreversible Loss Analysis of Spirally Corrugated Tube

Determination of Loss Coefficients for Micro-Flow Devices: A Method Based on the Second Law Analysis (SLA)

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Local Entropy Generation in Compressible Flow Through A High Pressure Turbine with Delayed Detached Eddy Simulation

Turbomachinery Loss Analysis: the Relationship Between Mechanical Work Potential and Entropy Analyses

Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation

Energy Analysis of Francis Turbine for Various Mass Flow Rate Conditions Based on Entropy Production Theory

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

Investigations of the Thermodynamic Entropy Evaluation in a Hydraulic Turbine under Various Operating Conditions

Numerical Study of Fin-and-Tube Heat Exchanger in Low-Pressure Environment: Air-Side Heat Transfer and Frictional Performance, Entropy Generation Analysis, and Model Development

Entropy Transportation Equation Based Loss Mechanism Analysis with High Fidelity Turbulence Simulation Results

Large Eddy Simulation of Energy Transport in Highly Compressible Transverse Jets

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

Numerical Study for Flow Loss Characteristic of an Axial-Flow Pump as Turbine via Entropy Production Analysis

Numerical Study of Film Cooling at the Outlet of Gas Turbine Exhaust

Entropy generation optimization of EMHD mixed convective flow with higher order chemical reaction: Sensitivity analysis

Conjugate Heat Transfer Simulation and Entropy Generation Analysis of Gas Turbine Blades

Isentropic analysis and numerical investigation on high-pressure hydrogen jets with real gas effects

Investigation of Irreversible Losses in Subsonic Compressor Cascade Flow Field: A Study on Viscous Dissipation and Temperature Gradient Term in Entropy Production Rate

Application of Entropy Production Theory to Hydro-Turbine Hydraulic Analysis