Abstract:Abstract In modern industries, high-speed machinery occupies a fundamental place. However, rotating machinery will inevitably produce a variety of structural noise and vibration. Generally, vibration isolation means can be divided into active vibration isolation and passive vibration isolation, among which the most representative are active magnetic bearings (AMBs) and vibration isolators, respectively. The combination of active magnetic bearings and vibration isolators is widely used in rotating machinery because of its excellent effect in vibration and noise reduction. This paper concentrates on the analysis of the vibration transmission mechanism of the active magnetic bearings coupled with the vibration isolators. A 30 kW prototype pump is taken as an example to help describe the research method. The model of the pump is first established. The stationary pump components and the rotor are respectively modeled through the finite element method and converted to substructure modal expression after low-order modal extraction. The bearing force is simplified to spring-dampers with equivalent stiffness and equivalent damping relating to the exciting frequency. The vibration isolators are simplified as three-dimensional spring-dampers. Based on the model, this paper then investigates the matching relation of the AMBs and the vibration isolators and proposes a dynamic vibration isolation design method for the rotor-AMBs-flexible support system. On the basis of the frequency-domain response of the original design, this design method gives the frequency-domain curves of the desired stiffness and damping of the suitable active vibration isolation, which can be used to guide the controller design of the AMBs and isolators selection. According to the design, we have done laboratory experiments on the prototype pump. The results show that the design method based on matching relation has good performance in vibration isolation.

Vibration Rapid Analysis and Comparison of Motor Support in Container Crane’s Machine Room with Single Degree of Freedom and Finite Element Method Based on Visual Basic

Dynamic modeling and vibration response analysis of high speed motorized spindle

Nonlinear static analysis of space truss using vector mechanics of structure

Dynamic Analysis of Support System of Permanent Magnet Traction Motors for High-Speed Trains

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

A novel control strategy for vibration reduction in the permanent magnet motor drive system with eccentric load

Analysis of the influence of mechanical vibration control strategy on structural safety

Analysis of the similarity design and vibration transmission characteristics of typical support structures of an aero-engine

Modal Analysis for Vertically Cutting the Motor Frame Based on ANSYS Software

Research on Vibration Suppression for Planar Motors on the Basis of Modal Force Constraint

Vibration characterization of a planar multi-degree-of-freedom industrial machine

Container Vehicle-Truss Bridge Coupled Vibration Analysis and Structural Safety Assessment under Stochastic Excitation

Vibration Test and Fault Diagnosis for Main Hoist Gearbox of Heavy Casting Crane

Vibration Modal Analysis of the Upper Frame of Hydraulic Excavator

Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft

Vibration Analysis of Main Transmission System of the Bar Mills

Analysis of Flexible Supported Industrial Robot on Terminal Accuracy

Dynamics modeling and electromechanical coupling characteristics analysis of cage induction motors

Modal Analysis and Vibration Control of the Thin-wall Components During the Multipoint Flexible Processing

Vibration control analysis of vehicle steering system based on combination of finite-element analysis and modal testing

Matching Design of Active Magnetic Bearing and Elastic Support Vibration Isolator