Abstract:Damage detection algorithms employing the conventional acceleration measurements and the associated modal features may underperform due to the limited number of sensors used in the monitoring and the smoothing effect of spline functions used to increase the spatial resolution. The effectiveness of such algorithms could be increased if a more accurate estimate of mode shapes were provided. This study presents a hybrid structural health monitoring method for vibration-based damage detection of bridge-type structures. The proposed method is based on the fusion of data from conventional accelerometers and computer vision-based measurements. The most commonly used mode shape-based damage measures, namely, the mode shape curvature method, the modal strain energy method, and the modal flexibility method, are used for damage detection. The accuracy of these parameters used together with the conventional sparse sensor setups and the proposed hybrid approach is investigated in numerical case studies, with damage scenarios simulated on a simply-supported bridge. The simulations involve measuring the acceleration response of the bridge to ambient vibrations and train crossings and then processing the data to determine the modal frequencies and mode shapes. The efficiency and accuracy of the proposed hybrid health monitoring methodology are demonstrated in case studies involving scenarios in which conventional acceleration measurements fail to detect and locate damage. The robustness of the proposed method against various levels of noise is shown as well. In the studies considered, damage as small as 10% decrease in flexural stiffness of the bridge and localized in less than 1% of the span-length of the bridge is reliably detected even with very high levels of measurement noise. Finally, a modified modal flexibility damage parameter is derived and used to alleviate the shortcomings of the modal flexibility damage parameter.

Health Assessment of a Post-Tensioned Concrete Bridge

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

HEALTH-MONITORING METHOD FOR BRIDGES UNDER ORDINARY TRAFFIC LOADINGS

New Approach for Strain Modal Measurement and Damage Detection of Bridges

Health monitoring of steel box girder bridges using non-contact sensors

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Damage Assessment of Structures Using Modal Test Data

Online Monitoring of Flexural Damage Index of a Cable-Stayed Bridge

Damage Identification Method for Medium- and Small-Span Bridges Based on Macro-Strain Data under Vehicle-Bridge Coupling

Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring

A strain sensor based monitoring and damage detection system for a two-span beam bridge

Damage detection of bridge structures under moving loads based on CEEMD and PSD sensitivity analysis

Research on damage identification of simply supported bridge based on effect size method for vehicle-bridge coupled vibration

A Hybrid Method for Vibration-Based Bridge Damage Detection

Experimental study on the damage identification of bridge expansion joints

Structural condition assessment of a bridge pier: A case study using experimental modal analysis and finite element model updating