Abstract:The aging process plays a pivotal role in shaping the microstructure of Cu-Ni-Si alloys, a typical kind of precipitation-strengthened Cu alloy. This process significantly affects both the mechanical and electrical properties of the final Cu alloy strips. In this study, Cu-Ni-Si alloy sheets underwent a 90% reduction through cold rolling at room temperature, followed by heat treatment at temperatures ranging from 400 to 650 ℃. A comprehensive investigation was conducted into how cold rolling deformation and the aging process affect the alloy's microstructure, as well as its mechanical and electrical properties. The analysis was performed using a scanning electron microscope equipped with a backscattered electron diffraction system (SEM-EBSD), complemented by transmission electron microscopy (TEM). The findings revealed that recrystallization and precipitation occurred concurrently and were both enhanced by higher temperatures and prolonged heat treatment durations. However, recrystallization at elevated temperatures has a marginal impact on enhancing electrical conductivity and results in a significant reduction of mechanical properties. In contrast, alloys preserving the deformed microstructure benefit from multiple strengthening mechanisms, including precipitation, dislocation, grain boundary, and texture strengthening. This study offers quantitative insights into the precipitation and recrystallization behaviors of Cu-Ni-Si alloys, contributing significantly to a deeper understanding of the mass production of high-performance copper alloys.

Thermomechanical Treatment of Cu-1.5Ni-0.27Si Alloy

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

MICROSTRUCTURE OF AS-MELT SPUN Al-Cu-Mg-Fe-Ni ALLOY AND ITS VARIATION IN CONTINUOUS HEAT TREATMENT

Effects of Cold Rolling Reduction Rate on the Microstructure and Properties of Cu-1.16Ni-0.36Cr Alloy after Thermo-Mechanical Treatment

Effect of Aging Temperature on Microstructure and Properties of Cold-Rolled Cu-Ni-Si Alloy

Microstructure and physical properties of Cu-2.3Ni-0.5Si alloy with thermo-mechanical treatment

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

The Microstructure Evolution and Dynamic Recrystallization Mechanism of Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr Alloys during High-Temperature Deformation

Deep Cryogenic Treatment Characteristics of a Deformation-Processed Cu-Ni-Co-Si Alloy

Microstructure and Property Evolution of Cu–9Ni–6Sn-xCr Alloys During Thermo-Mechanical Treatment Process

Microstructure and properties of Cu–Ni–Co–Si–Cr–Mg alloys with different Si contents after multi-step thermo-mechanical treatment

Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy

Study of Deformation and Aging Behaviors of a Hot Rolled–quenched Cu–Cr–Zr–Mg–Si Alloy During Thermomechanical Treatments

Effect of Cold Rolling and Aging Treatment on the Microstructure and Properties of Cu–3Ti–2Mg Alloy

Microstructure and properties of high strength, high conductivity Cu-2.5Fe-0.3Cr-0.3Mg-0.2Si-0.1Ca-0.1Zr alloy treated by multi-stage thermomechanical treatment

Effect of cold rolling on microstructure and mechanical properties of a Cu–Zn–Sn–Ni–Co–Si alloy for interconnecting devices

Microstructure and hot deformation behavior of the Cu-1Ni-0.9Sn-0.5Ti-0.3Cr alloy

Microstructure evolution and mechanical behavior of Cu-7Ni-7Al-4Fe-2Mn alloy via a quenching-aging heat treatment

Effect of deformation and aging treatment on the microstructure and properties of Cu-0.45Cr-0.14Ti (wt.%) alloy

Enhanced hardness and moderate thermal conductivity of Cu-2.4Ni-0.7Si alloy processed via selective laser melting followed by suitable heat treatment