Abstract:W antenna window for hypersonic aircrafts requires the material to possess sufficient mechanical strength and structural integrity to withstand the aerodynamic force as well as rain and particle erosion, and should exhibit excellent dielectric properties, i.e. low and thermally stable dielectric constant and loss tangent, to transmit microwave signals at high temperatures. As the amost promising candidate of the high temperature wave-transparent materials, nitride ceramics, including boron nitride and silicon nitride, possess excellent high-temperature mechanical properties, superior heat proof ability and fair enough shock resistance. However, as ceramic material, the inherent brittleness acts as an obstacle for its further application in the extreme environment. Therefore, an excellent reinforcement for the wave-transparent composite is required. Silica fiber is the commonest wave-transparent reinforcement and widely used in the last decades, however, its long-time use temperature is blow 1000 °C. Silicon nitride nanowire with high modulus, high strength, low dielectric parameters, and stability at high temperatures, is supposed to be a potential reinforcement to meet the hypersonic flying environment. In this study, silicon nitride nanowires were synthesized by a Vapor-Solid reaction method, and the growth mechanism, the surface element composition of silicon nitride nanowires were investigated. The as-received silicon nitride nanowires at 1500°C exhibit a diameter about 200nm, a length about several millimeters and a relative high yield. The low dielectric boron nitride ceramic matrix composites toughened by silicon nitride nanowires were then fabricated. The composites exhibit good mechanical properties and excellent dielectric properties, with the flexural strength of 120 MPa, the fracture toughness of about 5.5 MPa•m1/2, the dielectric constant of 3.1 and the loss tangent of 0.002. The toughening mechanism includes crack deflection, nanowires pull-out, nanowires bridged and nanowires breakage in the composites.

Fabrication and High-Temperature Mechanical Properties of 2.5dsi(3)n(4f)/bn Fiber-Reinforced Ceramic Matrix Composite

High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C

Oxidation Behavior of Carbon Fibers in Ceramizable Phenolic Resin Matrix Composites at Elevated Temperatures

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Thermal Protection and Dielectric Properties of Borosilicate Coatings for SiCf/SiC Composites Under High-Temperature Oxidation

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Silicon nitride nanowires toughened boron nitride ceramic composite

Oxidation Properties of ZrB2-20vol.%SiC-10vol.%BN Ceramic Composite at 1200°C

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

A Novel Fused SiO2 and h-BN Modified Quartz Fiber/Benzoxazine Resin Ceramizable Composite with Excellent Flexural Strength and Ablation Resistance

Fabrication and properties of porous boron nitride/silicon oxynitride ceramic composites via gas pressure sintering

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C

Long-term oxidation and ablation behavior of C<sub>f</sub>/ZrB<sub>2</sub>-SiC composites at 1500, 2000, and 2200C

Advanced Fabrication Method and Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics

Boron nitride nanosheets composite SiC fibers with enhanced mechanical properties and high‐temperature resistance

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Fabrication and Microstructure Evolution of Al2O3/ZrBN-SiCN/Al2O3 High-Temperature Oxidation-Resistant Composite Coating

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C

Thermal Shock Resistance of the Porous Boron Nitride/silicon Oxynitride Ceramic Composites