Abstract:Variable geometry turbines (VGT) hold a crucial role in gas turbines and variable cycle engines (VCE) by allowing adjustments to different operational conditions. In order to realize the adjustable function of the VGT stator blade, there will be partial gap structure at both ends of the stator blade, which will lead to partial leakage flow and serious secondary flow loss at the blade end that cannot be ignored, especially in a large angle adjustment range. At present, there are few researches on turbine cascades considering the real partial gap structure and winglet tip, and the numerical simulation calculation is mainly used, while the in-depth study using wind tunnel test is rarely seen. Therefore, this study attempts to analyze the internal flow characteristics of variable geometry turbine cascade by using five-hole pneumatic probe scanning and surface oil flow visualization, and discusses the mechanism of controlling partial clearance leakage flow and reducing secondary flow loss in the cascade by using winglet tip flow control technology. The winglet offset distance and the change of the relationship between the pivot and the clearance position on the flow field and flow loss is studied experimentally for the first time. The results show that the influence mechanism of winglet tip applied in VGT partial gap is quite different from that of typical blade tip clearance application, and more consideration should be given to the influence of pivot structure. Reasonable parameter selection can achieve a maximum loss reduction of 13.4 % and 20.2 % with and without pivot, respectively, while the unreasonable flow control scheme may lead to the loss or even increase with pivot. The interaction between the new secondary flow structure induced by pivot in the gap and other gap leakage flows is analyzed to explore the new mechanism of using winglet tip to reduce the loss of gap leakage flow.

An Experimental Investigation into the Influence of Diameter-Blade Height Ratios on Secondary Flow Losses in Annular Cascades with Leaned Blades

Secondary Flow Reduction By Blade Redesign And Endwall Contouring Using An Adjoint Optimization Method

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Effects of Leaning and Curving of Blades with High Turning Angles on the Aerodynamic Characteristics of Turbine Rectangular Cascades

Experimental Investigation of the Aerodynamic Performance of Bowed Blades in High-turning Linear Turbine Cascades

A numerical investigation of application of bowed blade to control flow separation on highly loaded turbine

The Blade Curving Effects in a Turbine Stator Cascade With Low Aspect Ratio

Effects of Blade Curve on Turbine Cascade Performance

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Experimental investigation on the influence of bowed blade in ultra-highly loaded turbine cascade

Flow Separation Control by Using Bowed Blade in Highly Loaded Turbine Cascades

Comparative Experimental Investigation on Aerodynamic Performance of Steam Turbine Cascades, Part I - Rotor Blades

Flow fields and losses downstream of an ultra-highly loaded turbine cascade with bowed blades

Flow Loss Mechanism in Radial Variable Area Nozzles

Large Eddy Simulation of Secondary Flows in an Ultra-High Lift Low Pressure Turbine Cascade at Various Inlet Incidences

Experimental investigation of secondary flow losses in a variable geometry linear turbine cascade with winglet tip

Blade Bowing Effect on Aerodynamic Performance of a Highly Loaded Turbine Cascade

Experimental and Numerical Investigation on Middle Passage Gap Leakage with Different Mass Flow Rate and Injection Angle on Turbine Endwall

Analysis of the Mechanism Governing the Migration of Boundary Layers in a Highly-loaded Turbine Cascade Controlled By Using Bowed Blades