Abstract:The application of centrifugal compressors is extensive in industries such as aerospace and energy. The blade is the primary factor affecting the aerodynamic performance of compressors. In this paper, the aerodynamic performance of a centrifugal compressor with leaned and bowed 3D blades is investigated. The spanwise section profiles of the blade in the circumferential direction are deflected at different angles, resulting in four compressors with distinct leaned and bowed 3D blades based on the original model. There is a significant change in isentropic efficiency of the modified models under design conditions. Specifically, models 1, 3, and 4 experienced an increase of 0.97%, 1.04%, and 0.79%, respectively, while model 2 experienced a decrease of 0.70%. The profile of the blade tip and 50% spanwise section are shifted towards the suction surface, resulting in a geometric structure where the blade is concave towards the pressure surface. This structure gradually lifts the flow from the blade root to the blade tip downstream to the outlet area of the flow channel, reducing the load on the trailing edge of the blade and making the flow more closely aligned with the blade. At the same time, the larger radial velocity gradient near the blade tip suppresses the backflow on the shroud side, making the flow at the impeller outlet more stable. The outlet velocity of the impeller is more evenly distributed along the spanwise and circumferential directions, which improves the flow at the inlet of the diffuser and enhances the efficiency of the diffuser. Due to the high spanwise height of the leading edge of the blade, this bowed blade structure has little effect on the spanwise curvature upstream of the blade, resulting in negligible influence on the flow of the upstream channel.

Experimental investigation on the influence of bowed blade in ultra-highly loaded turbine cascade

Experimental Investigation of the Aerodynamic Performance of Bowed Blades in High-turning Linear Turbine Cascades

A numerical investigation of application of bowed blade to control flow separation on highly loaded turbine

Blade Bowing Effect on Aerodynamic Performance of a Highly Loaded Turbine Cascade

Flow fields and losses downstream of an ultra-highly loaded turbine cascade with bowed blades

Analysis of the Mechanism Governing the Migration of Boundary Layers in a Highly-loaded Turbine Cascade Controlled By Using Bowed Blades

Flow Separation Control by Using Bowed Blade in Highly Loaded Turbine Cascades

Influences of Blade Bowing on Flowfields of Turbine Stator Cascades

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

The Blade Curving Effects in a Turbine Stator Cascade With Low Aspect Ratio

Effects of Leaning and Curving of Blades with High Turning Angles on the Aerodynamic Characteristics of Turbine Rectangular Cascades

Investigation of non-axisymmetric endwall contouring in a high loaded turbine stator cascade

Experimental Investigation into the Effects of Blade Pitch Angle and Axial Distance on the Performance of a Counter-Rotating Tidal Turbine

Investigation on Influence of Width and Position on Performance of Blended Blade and End Wall Cascade

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Comparative Experimental Investigation on Aerodynamic Performance of Steam Turbine Cascades, Part I - Rotor Blades

Comparative Experimental Investigation On Aerodynamic Performance Of A Steam Turbine Cascades, Part Ii - Stator Vanes

Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence

Bowed Blade Based on Bezier Function and Its Application to VAWT

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades