Abstract:A gas inlet channel is established to model the inflow of the inert gas (95% Ar) and dopant gas (5% N2), and a gas outlet channel to model the outflow of the gas species. The joint that allows exchanges of the gas species is modeled as a thin porous graphite sheet to simulate the mass transfer between the inside and outside of the growth chamber. The fluid flow velocity field inside and outside the crucible is calculated inside and outside the crucible under several experimental conditions. Although the exchange of the atmosphere control gas occurs only at the joint, the N2 can still rapidly diffuse to the crystal surface. Single‐crystal silicon carbide (SiC) is an important semiconductor material for the fabrication of power and radio frequency (RF) devices. The major technique for growing single‐crystal SiC is the so‐called physical vapor transport (PVT) method, in which not only the thermal field but also the fluid‐flow field and the distribution of gas species can be hardly measured directly. In this study, a multi‐component flow model is proposed that includes the inside and outside of a growth chamber and a joint between the seed crystal holder and crucible which allows exchanges of the gas species. The joint is simulated as a thin porous graphite sheet. The Hertz‐Knudsen equation is used to describe the sublimation and deposition. The convection and diffusion are described by the Navier–Stokes equations and mixture‐averaged diffusion model, in which the Stefan flow is taken into account. The numerical simulations are conducted by the finite element method (FEM) with a multi‐physics coupled model, which is able to predict the fluid flow field, species distribution field, crystal growth rate, and evolution of the molar concentration of dopant gas. Using this model, the effects of several experimental conditions on the transport of gas species and the growth rate of single‐crystal SiC are analyzed.

Novel Method for High Speed SiC Vapor Growth

Novel Method for High Speed SiC Vapor Growth

A novel method to increase the growth rate in sublimation crystal growth of advanced materials

Increase of SiC sublimation growth rate by optimizing of powder packaging

Numerical Simulation of a Novel Method for PVT Growth of SiC by Adding a Graphite Block

Monte-carlo modeling for grain growth process in Vapor-Liquid-Solid phase sintered materials

Growth of Silicon Carbide Bulk Crystals by Physical Vapor Transport Method and Modeling Efforts in the Process Optimization

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Effects of Solution Height and Crystal Rotation on the Solution Flow Behavior in the Top-Seeded Solution Growth of SiC Single Crystals

Numerical Simulation of the Transport of Gas Species in the PVT Growth of Single‐Crystal SiC

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Growth Kinetics and Thermal Stress in the Sublimation Growth of Silicon Carbide

Multi-length Scale Monte Carlo Simulation of the Growth Process of SiC Film by Chemical Vapor Deposition

Study of Effects of Varying Parameters on the Dislocation Density in 200 Mm Sic Bulk Growth

A Thermal Transport And Non-Equilibrium Deposition Model In Aln Sublimation Growth Process

Study of Effect of Coil Movement on Growth Conditions of SiC Crystal

A review of the simulation studies on the bulk growth of silicon carbide single crystals

Isotropic and Anisotropic Growth Models for the Sublimation Vapour Transport Process

Advances in fast 4H–SiC crystal growth and defect reduction by high-temperature gas-source method

Modeling-Based Design of the Control Pattern for Uniform Macrostep Morphology in Solution Growth of SiC

Diameter enlargement of SiC bulk single crystals based on simulation and experiment