Abstract:To study particle bidispersity effect on the comprehensive performance of a gas-solid fluidized system, multi-field coupling numerical research of large-difference bidisperse circulating fluidized bed was performed. First, numerical simulation was conducted on the dynamic characteristic of a bidisperse gas-solid system that contained both Geldart A and B particles; heat transfer and reaction performances were then studied with the introduction of a propane dehydrogenation (PDH) kinetic reaction model; and finally, the concept of coupling fluid catalytic cracking (FCC) and PDH processes was proposed, and the feasibility was preliminarily discussed. The results showed that the two particle phases were hierarchically distributed with a pronounced segregation layer due to their large-difference bidispersity characteristic, the Geldart B-type particle was in a bubbling fluidizing state, while the Geldart A-type particle was in a turbulent fluidizing state. With the initialized bed and regeneration temperature set to 973 K, the regenerated catalyst's final, balanced temperature could decrease to 942 K, which demonstrated that a significant decline in contact temperature between the feedstock and catalyst could be achieved in the following FCC risers. Additionally, this coupling process also achieved a nearly complete conversion of propane into propene, with a conversion efficiency of above 95%. The results showed the feasibility of this coupling process, which could optimize FCC riser reaction conditions and further achieve a higher-valued light gas yield. This research can provide a reference for the study of the bidispersity effect on a gas-solid system, and the introduced coupling process can provide a new model for the FCC process's optimization.

Multi-scale CFD Simulation of Hydrodynamics and Cracking Reactions in Fixed Fluidized Bed Reactors

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Multi-scale CFD Simulations of Bubbling Fluidized Bed Methanation Process

Multi‐scale Study on the Secondary Reactions of Fluid Catalytic Cracking Gasoline

Multi-scale Heat Transfer in Fluidized Bed Reactors by Eulerian CFD Modeling

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

CFD Simulation of Hydrodynamics and Heat Transfer for Scale-Up of the Jetting Fluidized Beds

New Insights into Intraparticle Transfer, Particle Kinetics, and Gas–solid Two-Phase Flow in Polydisperse Fluid Catalytic Cracking Riser Reactors under Reaction Conditions Using Multi-Scale Modeling

A New Lumped Kinetic Model of an Industrial Hydrocracking Process

Trans-level multi-scale simulation of porous catalytic systems: Bridging reaction kinetics and reactor performance

Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multi-jet combustion reactor

Numerical Investigation of Flow, Heat Transfer, and Kinetic Reaction in a Large‐difference Bidisperse, Circulating Fluidized‐bed Reactor

Numerical Simulation of Scale-Up Effects of Methanol-to-olefins Fluidized Bed Reactors

Advances in fixed-bed reactor modeling using particle-resolved computational fluid dynamics (CFD)

CFD Modeling Using Heterogeneous Reaction Kinetics for Catalytic Dehydrogenation Syngas Reactions in a Fixed-Bed Reactor

Numerical exploration of the flow regime transition of a novel catalytic cracking reactor and operation mode analysis