Abstract:The gas-solid flow in a fluidized bed is modelled by a combined approach of discrete particle method and computational fluid dynamics (DPM-CFD), in which the motion of individual particles is obtained by solving Newton's second law of motion and gas flow by the Navier-Stokes equation based on the concept of local average. The coupling between DPM and CFD is achieved directly by applying the principle of Newton's third law of motion to the discrete particle and continuum gas which are modelled at different length and time scales. The equations of motion for a system of particles are solved by a collision dynamic model developed in this work which, in conjunction with the predictor-corrector method, allows stiff particles (K = 50,000 Nm(-1)) to be used with a reasonable computational time step (1.5 x 10(-5) s) while conserving the energy and momentum. The gas-phase equations are solved by the conventional SIMPLE method facilitated with the Crank-Nicolson scheme to give the second order accuracy in the time discretization.The proposed model shows its capacity of simulating the gas fluidization process realistically from a fixed to fully fluidized bed via an incipient fluidization stage. This is done by a series of numerical tests to reproduce the experimental procedures in determining the minimum fluidization velocity of 2400 particles (rho(p) = 2700 kg m(-3), D = 4 x 10(-3) m) in a pseudo-three-dimensional central jet fluidized bed of dimensions 0.9 x 0.15 x 0.004 m. The hysteretic feature of bed pressure drop vs superficial gas velocity curve is obtained for the first time realistically from first principles, with the predicted minimum fluidization velocity in good agreement with experiment. It is demonstrated that the proposed model is able to capture the gas-solid flow features in a fluidized bed from the largest length and time scales relevant to the processing equipment down to the smallest ones relevant to the individual particles. (C) 1997 Elsevier Science Ltd.

CFD Simulation of Hydrodynamics and Heat Transfer for Scale-Up of the Jetting Fluidized Beds

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulation of Gas-particle Hydrodynamics in CFB

CFD modeling of gas–solid flow in a two‐stage jetting fluidized bed with an overflow standpipe

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

Numerical Simulation on Characteristics of Hydrodynamics, Interphase and Wall to Bed Heat Transfer in a Pseudo 2D Spouted Bed Using Supercritical CO2 As Fluidizing Agent

Numerical Simulation and Optimization of Hydrodynamics in a Novel Integral Multi-Jet Spout-Fluidized Bed

Numerical Simulation of the Gas-Solid Flow in a Fluidized Bed by Combining Discrete Particle Method with Computational Fluid Dynamics

Simulation of Gas–solid Flow Characteristics in a Circulating Fluidized Bed Based on a Computational Particle Fluid Dynamics Model

2D Cfd Simulation of Hydrodynamics of the Dense Zone of A 65t/h High-Low Bed Cfb

Eulerian-Lagrangian Simulation of the Heat Transfer Behavior of Particles with Different Diameters in Fluidized Bed with Immersed Tube

CFD modelling and simulation of hydrodynamics in liquid-solid circulating fluidized beds

Numerical simulation of radiation heat transfer characteristics in a cylindrical fluidized bed

The critical role of scale resolution in CFD simulation of gas-solid flows: A heat transfer study using CFD-DEM-IBM method

Optimizing injection modes and reactor shapes in gas-particle fluidized beds using a mesoscale CFD model

Computational study of heat transfer in bubbling fluidized beds with geldart a powder

Discrete Particle Simulation of Heat Transfer in Pressurized Fluidized Bed with Immersed Cylinders

Hydrodynamics and Scale-Up of Liquid–solid Circulating Fluidized Beds: Similitude Method Vs. CFD

Simulation Investigation of Heating Rate and Temperature Uniformity in Fluidized Bed