Abstract:Transition metal oxalates have attracted wide attention due to the characteristics of the conversion reaction as anode materials in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), However, there are huge volume expansion and sluggish circulation dynamics during the reversible Li+ and Na+ insertion/extraction process, which would lead to unsatisfactory reversible capacity and stability. In order to solve these problems, a rod-like structure Ni0.5Co0.5C2O4·2H2O is in-situ formed on the reduced graphene oxide layer (Ni0.5Co0.5C2O4·2H2O/rGO) in a glycol-water mixture medium via an interface induced engineering strategy. Benefitting from the synergistic cooperation of nano-diameter rod-like structure and high conductive rGO networks, the experimental results show that the prepared Ni0.5Co0.5C2O4·2H2O/rGO electrode has predominant rate performance and ultra-long cycle stability. For the LIBs, it not only exhibits an ultrahigh reversible capacity (1179.9 mA h g-1 at 0.5 A g-1 after 300 cycles), but also presents outstanding rate and cycling performance (646.5 mA h g-1 at 5 A g-1 after 1200 cycles). Besides, the Ni0.5Co0.5C2O4·2H2O/rGO electrode displays remarkable sodium storage capacity of 221.6 mA h g-1 after 100 cycles at 0.5 A g-1. Further, the extraordinary electrochemical capability of Ni0.5Co0.5C2O4·2H2O/rGO active material is also reflected in two full-cells, assembled using commercial LiCoO2 as cathode for LIBs and commercial Na3V2(PO4)3 as cathode for SIBs, both of which can show wonderful specific capacity and cycling stability. It is found in in-situ Raman experiments that the reversible changes of oxalate peaks are monitored in a charge/discharge process, which is scientific evidence for the transform reaction mechanism of metal oxalates in LIBs. These findings not only provide important ideas for studying the charge/discharge storage mechanism but also give scientific basis for the design of high-performance electrode materials.

Facile fabrication of RGO wrapped LiMn2O4 nanorods as a cathode with enhanced specific capacity

Reduced graphene oxide wrapped ZnMn 2 O 4 /carbon nanofibers for long-life lithium-ion batteries

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Synthesis and Superior Cathode Performance of Sandwiched LiMn2O4@rGO Nanocomposites for Lithium-Ion Batteries

LiMnO2@rGO Nanocomposites for High‐performance Lithium‐ion Battery Cathodes

Synthesis of Hierarchical and Bridging Carbon-Coated LiMn0.9Fe0.1PO4 Nanostructure As Cathode Material with Improved Performance for Lithium Ion Battery

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Hollow sea urchin-like microspheres of the dual transition metal oxides NiO/Co 3 O 4 immobilized on rGO enhance lithium-ion battery cycling and rate performance

Facile synthesis of Fe-MOF/RGO and its application as a high performance anode in lithium-ion batteries

Synthesis and characterization of LiMn0.8Fe0.2PO4/rGO/C for lithium-ion batteries via in-situ coating of Mn0.8Fe0.2C2O4·2H2O precursor with graphene oxide

Rod-like Ni0.5Co0.5C2O4·2H2O in-situ formed on rGO by an interface induced engineering: Extraordinary rate and cycle performance as an anode in lithium-ion and sodium-ion half/full cells

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

Facile preparation of cellulose nanofiber derived carbon and reduced graphene oxide co-supported LiFePO4 nanocomposite as enhanced cathode material for lithium-ion battery

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Optimization of NiFe2O4/rGO Composite Electrode for Lithium-Ion Batteries

Nitrogen-doped Carbon Stabilized LiFe0.5Mn0.5PO4/rGO Cathode Materials for High-Power Li-ion Batteries

Rational construction of graphitic carbon nitride composited Li-rich Mn-based oxide cathode materials toward high-performance Li-ion battery

Improved Kinetics of LiNi1/3Mn1/3Co1/3O2 Cathode Material Through Reduced Graphene Oxide Networks

Reduced Graphene Oxide Wrapped Hollow Molybdenum Trioxide Nanorod for High Performance Lithium-Ion Batteries

Facile synthesis of N-doped reduced graphene oxide matrix-covered porous Fe 2 VO 4 hybrid composite nanostructures as anode material for lithium-ion batteries

Construction of Sandwich‐Like R‐fe3o4/rgo@cn Anode Materials As Conductive Agent‐Free Anode for Lithium‐Ion Batteries