Abstract:High-voltage spinel LiNi0.5Mn1.5O4 (LNMO) is a promising cathode material for next-generation lithium-ion batteries (LIBs), but its poor cycle performance has impeded its commercialization. In this study, we developed highly stable LNMO cathode materials having an octahedral morphology through a solid-state high-energy ball-mill–cum–spray-drying method. We also developed a novel strategy for modifying this cathode material with two kinds of carbon materials, thereby improving the electrochemical cycling performance. Introducing single-walled carbon nanotubes (SWCNTs) as a sub-carbon conductive additive during the slurry preparation process improved the conductivity of electrons between the particles of the cathode material. The LNMO electrode modified with the SWCNT sub-carbon additives exhibited an average Coulombic efficiency of 99.4% after 500 cycles at 1C, compared with 98.9% for the pristine LNMO-based electrode. Furthermore, we used a wet-chemical method to coat graphene oxide (GO) onto the post-sintered LNMO cathode material to act as a protective layer, preventing corrosion induced by HF in the electrolyte. The capacity retention of the GO-coated LNMO electrode after 500 cycles at 1C (91.8%) was higher than that of the pristine LNMO (52.5%). The corresponding dual-modification strategy, combining the SWCNTs and GO, provided LNMO cathode materials exhibiting superior rate performance and cyclability, with an average Coulombic efficiency of 99.3% and capacity retention of 92.9% after 500 cycles at 1C. Thus, the LNMO cathode materials prepared in this study possessed excellent electrochemical properties favoring their marketability, applicability, and competitiveness for application in high-voltage LIBs.

Improved Kinetics of LiNi1/3Mn1/3Co1/3O2 Cathode Material Through Reduced Graphene Oxide Networks

Synthesis and Electrochemical Properties of Graphene-Modified Lico1/3ni1/3mn1/3o2 Cathodes for Lithium Ion Batteries

Synthesis of Hierarchical and Bridging Carbon-Coated LiMn0.9Fe0.1PO4 Nanostructure As Cathode Material with Improved Performance for Lithium Ion Battery

Electrophoretically Deposited P-Phenylene Diamine Reduced Graphene Oxide Ultrathin Film on LiNi0.5Mn1.5O4 Cathode to Improve the Cycle Performance.

LiMnO2@rGO Nanocomposites for High‐performance Lithium‐ion Battery Cathodes

Synthesis and Superior Cathode Performance of Sandwiched LiMn2O4@rGO Nanocomposites for Lithium-Ion Batteries

Three-dimensional Hierarchical Graphene and CNT-coated Spinel ZnMn2O4 As a High-Stability Anode for Lithium-Ion Batteries

Preparation, Lithium Storage Performance and Thermal Stability of Nickel‐Rich Layered LiNi0.815Co0.15Al0.035O2/RGO Composites

Synthesis and characterization of LiMn0.8Fe0.2PO4/rGO/C for lithium-ion batteries via in-situ coating of Mn0.8Fe0.2C2O4·2H2O precursor with graphene oxide

The Reduced Graphene Oxide Conductive Additives with a Certain Defect Concentration Enabling Rate-Capability of Lithium-Ion Batteries

Facile fabrication of RGO wrapped LiMn2O4 nanorods as a cathode with enhanced specific capacity

High-Loading Nickel Cobaltate Nanoparticles Anchored on Three-Dimensional N-Doped Graphene as an Efficient Bifunctional Catalyst for Lithium-Oxygen Batteries

Effect of Single-Walled Carbon Nanotube Sub-carbon Additives and Graphene Oxide Coating for Enhancing the 5 V LiNi 0.5 Mn 1.5 O 4 Cathode Material Performance in Lithium-Ion Batteries

3D network-structured CoSb/P-CNFs@rGO as a highly conductive self-Supporting anode material for lithium-ion batteries

High Performance Li 2 MnO 3 /rgo Composite Cathode for Lithium Ion Batteries

Improvement in Electrochemical Performance of Calcined LiNi0.5Mn1.5O4/GO

Nitrogen-doped Carbon Stabilized LiFe0.5Mn0.5PO4/rGO Cathode Materials for High-Power Li-ion Batteries

Mn3O4 nanoparticles embedded in 3D reduced graphene oxide network as anode for high-performance lithium ion batteries

Single-Phase Mixed Transition Metal Carbonate Encapsulated by Graphene: Facile Synthesis and Improved Lithium Storage Properties

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Reduced Graphene Oxide Networks As an Effective Buffer Matrix to Improve the Electrode Performance of Porous Nico2o4 Nanoplates for Lithium-Ion Batteries