Abstract:The development of lithium-ion batteries (LIBs) possessing the satisfactory capacity and energy density is critical for many new energy applications,such as portable electronics and electric vehicles (EVs).Although the current LIBs have demonstrated substantial success in widespread applications and commercialization,challenges still exist in situations that require high rate charge/ discharge processes and have high risk in serving as power resource of EVs and hybrid EVs.Commercial anode materials have been dominated by graphite for nearly 20 years,however,owing to the low working voltage of graphite (0.2 V vs.Li+/Li),they suffer from potential safety issues of dendritic lithium formation and side reactions caused by the solid electrolyte interphase (SEI) layer on its surface.Hence,a new anode material with appropriate working voltage and high energy density simultaneously will be desirable.Li3VO4 (LVO) has been known as an excellent ion conduction material and optical material for many years,and it has demonstrated great potential as anode material of LIBs as well.Compared to Li4Ti5O12 and graphite,LVO,an intercalation type material,has an appropriate and safe working voltage range (0.5-1.0 V vs.Li+/Li),which prevents the high risk of graphite and the sacrifice of energy density and overall battery voltage.Meanwhile,LVO experiences small volume change during lithiation/ delithiation process and possesses a relatively high theoretical capacity of 400 (mA · h)/g,corresponding to two lithium ions intercalated in LVO and shifted to Li3+xVO4 (x=2).Nonetheless,the practical use of LVO still faces an obstacle,the low electrical conductivity.In this paper,in order to improve its capacity and rate performance,Li3VO4/RGO nanocomposites with three-dimension network structures were successfully prepared by drying method.The primary Li3VO4 particle's diameter is about 50-200 nm and dispersed on the surfaces of RGO nanosheets uniformly.After calcination at temperature of 600 ℃,the typical samples showed excellent electrochemical performance.Li3VO4/RGO-600 electrode achieved a high discharge specific capacity of 495.6 (mA · h)/g at 0.5 C and maintained 365.9 (mA · h)/g after 100 cycles;Even at a high current density of 10 C,it still delivered a superior capacity of 332.9 (mA · h)/g.

Facile synthesis of N-doped reduced graphene oxide matrix-covered porous Fe 2 VO 4 hybrid composite nanostructures as anode material for lithium-ion batteries

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Optimization of NiFe2O4/rGO Composite Electrode for Lithium-Ion Batteries

Hydrated Vanadium Pentoxide/reduced Graphene Oxide Composite Cathode Material for High-Rate Lithium Ion Batteries.

Hierarchical MnV2O4 Double-Layer Hollow Sandwich Nanosheets Confined by N-doped Carbon Layer As Anode for High Performance Lithium-Ion Batteries.

Facile synthesis of Fe-MOF/RGO and its application as a high performance anode in lithium-ion batteries

Rational design and synthesis of sandwich-like reduced graphene oxide/Fe2O3/N-doped carbon nanosheets as high-performance anode materials for lithium-ion batteries

Synthesis of Α-Fe2o3 Nanoparticles from Fe(OH)3 Sol and Their Composite with Reduced Graphene Oxide for Lithium Ion Batteries

Facile synthesis of FeCO3/nitrogen-doped carbon dot composites for lithium-ion battery anodes

Graphene Encapsulated Fe3O4 Nanorods Assembled into a Mesoporous Hybrid Composite Used As a High-Performance Lithium-Ion Battery Anode Material

The facile preparation of a carbon coated Bi2O3 nanoparticle/nitrogen-doped reduced graphene oxide hybrid as a high-performance anode material for lithium-ion batteries

Gradient electrospinning and controlled pyrolysis derived Fe O @N-doped carbon nanorods towards enhanced lithium storage

Facile One-Pot Synthesis of Fe3O4 Nanoparticles Composited with Reduced Graphene Oxide as Fast-Chargeable Anode Material for Lithium-Ion Batteries

Rational Synthesis of Spongy Fe3N@N-Doped Carbon Nanorods with Controlled Topography and Porosity for Enhanced Energy Storage Anodes in Lithium-Ion Batteries

Lithium Vanadium Oxide/Graphene Composite As a Promising Anode for Lithium-Ion Batteries.

Reduced Graphene Oxide‐Modified V 6 O 13 Nanostructure Hybrids with High Pseudo‐Capacitance Contribution as Cathode for High‐Rate Lithium Storage

Ultrafine VN quantum nanodots anchored in three-dimensional porous N-doped carbon with excellent pseudocapacitive behaviour for high rate lithium-ion batteries

Fe3O4-Embedded and N-Doped Hierarchically Porous Carbon Nanospheres As High-Performance Lithium Ion Battery Anodes

Preparation and Electrochemical Performance of Li3VO4/Reduced Graphene Oxide Nanocomposite Anode Material

Synthesis and Electrochemical Performance of Electrostatic Self-Assembled Nano-Silicon@N-Doped Reduced Graphene Oxide/Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries