Abstract:Catalytic activity of Ni/MgO-AN prepared from alcogel derived MgO was studied for the dry reforming of methane under atmospheric as well as high pressure (1.5 MPa). Different catalytic performances are observed in the atmospheric and high-pressure reactions; while the catalyst was highly active and extremely stable under atmospheric pressure it shows a self-stabilization process under high pressure. The self-stabilization process was characterized initially by a decrease in deactivation rate with increasing the reaction time-on-stream (TOS) up to ca. 12 h and then by a thereafter stabilization during the reaction. Characterizations of the coked catalyst with TPO, TEM, SEM, TPH and XRD techniques detected very little carbon deposits (ca. 0.2 wt% of the catalyst charge) on the used catalyst under atmospheric pressure. In contrast, large amount of whisker carbon deposit (ca. 100 wt% of the catalyst charge) were formed on the used catalyst under high pressure. In the high-pressure reaction, the activity decline during the initial stage was closely related to the amount of carbon deposits on the catalyst, which also became stabilized after the catalyst had served the reaction for ca. 12 h. The carbon deposits on the used catalyst in the high-pressure reaction contained two different components (α-carbon and β-carbon) while the carbon deposits in the atmospheric pressure reaction were in the form of α-carbon. No notable sintering of metallic nickel was detected by XRD on the used catalyst in the reaction under atmospheric pressure whereas unavoidable sintering of metallic Ni particles happened within the very first hours of the high-pressure reaction.

Effect of Ni loadings on the catalytic properties of Ni/MgO(111) catalyst for the reforming of methane with carbon dioxide

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

Durable Ni/Mgo Catalysts For Co2 Reforming Of Methane: Activity And Metal-Support Interaction

Effect of Formation of NiO-MgO Solid Solution on Activity and Stability of Ni/MgO-AN for CO2 Reforming of Methane

Unraveling the effect of particle size of active metals in Ni/MgO on methane activation and carbon growth mechanism

Performance of Ni/MgO–AN Catalyst in High Pressure CO 2 Reforming of Methane

Catalytic feature of Ni/MgO Catalyst for CO2 reforming of methane under pressurized condition

Effect of Ni Content of Ni/-Al2O3 Catalysts Prepared by the Atomic Layer Deposition Method on CO2 Reforming of Methane

Methane reforming over Ni/Ce-ZrO2 catalysts: effect of nickel content

Synthesis, Characterization and Catalytic Performance of MgO-coated Ni/SBA-15 Catalysts for Methane Dry Reforming to Syngas and Hydrogen

Carbon dioxide reforming of methane over MgO-promoted Ni/SiO2 catalysts with tunable Ni particle size

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Robust Nanosheet-Assembled Al2O3-supported Ni Catalysts for the Dry Reforming of Methane: the Effect of Nickel Content on the Catalytic Performance and Carbon Formation

Robust nanosheet-assembled Al 2 O 3 -supported Ni catalysts for the dry reforming of methane: the effect of nickel content on the catalytic performance and carbon formation

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Deactivation of Ni Catalysts During Methane Autothermal Reforming with CO2 and O2 in a Fluidized-Bed Reactor

Enhanced Low-Temperature Catalytic Activity for CO2 Methanation over NiMgx/Na-HNTs: the Role of MgO

Bound-state Ni species — a superior form in Ni-based catalyst for CH4/CO2 reforming

Carbon Deposition on Borated Alumina Supported Nano-Sized Ni Catalysts for Dry Reforming of CH4

Morphology Dependence of Catalytic Properties of Ni/CeO2 Nanostructures for Carbon Dioxide Reforming of Methane

Comparative study of atmospheric and high pressure CO 2 reforming of methane over Ni/MgO-AN catalyst