Abstract:Miniaturization of the medical implants is a key requirement for minimally-invasive surgery, while battery and antenna are the main bottlenecks. Wireless power transfer (WPT) is required to minimize or eliminate the battery, but the conventional inductive or capacitive WPT needs to implant a large inductor or capacitor to realize a relatively high efficiency. Based on the WPT, backscattering communication is widely used in medical implants due to its low power and low hardware cost. In conventional backscattering, the inductive or capacitive antenna of the implant should be large to improve the signal-to-noise ratio (SNR). In this work, we propose a new current-switching technique for the communication of medical implants. To avoid the use of antennas, the body tissue is utilized as the power-transfer medium, where a current loop is formed between the implanted and the external electrode pairs. The data of the medical implant controls its input impedance, and then switches the current loop, resulting in a data-modulated current in the external device. In this way, the external device can sense the data, achieving a high communication SNR without implanted antenna. A prototype is implemented to validate the proposed technique, where the implanted electrodes are as small as 200µ×200µm. Operating at 406 MHz of the standard medical band, the measurement shows that the signal-to-blocker ratio (SBR) achieves -35.7 dB, resulting in a high communication SNR of 21.9 dB at a data rate of 10 Mbps.

Developing Innovation — Wireless Transceiver Design for Implantable Medical Devices

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A Current-Switching Communication Technique for Miniaturized Medical Implants

Wireless energy and signal transmission system for micro implantable medical system

Enhancement Method of Efficiency and Working Range in Bio-Implant Wireless Power Transfer

Low Power Ic Design of the Wireless Monitoring System of the Orthopedic Implants

Electronic Design for an Implantable Wireless Power and Data Transmission System

Design Practice of Power-Oriented Integrated Circuits for Biomedical Implant Systems

A 6.78 MHz High-Efficiency Wireless Power Transfer Transmitter With Adaptive Dead-Time Control and Transistor-Width Switching for Implantable Medical Devices

Key Technologies in the Integrated Circuit Design for the Construction of a Wireless Healthcare System

A New Wireless Data Transmission Method of Implantable Devices

Wireless Power Delivery Techniques for Miniature Implantable Bioelectronics

A resonant current-mode wireless power transfer for implantable medical devices: an overview

An Ultra-Low Power 400mhz OOK Transceiver for Medical Implanted Applications.

A State of Art Review on Wireless Power Transmission Approaches for Implantable Medical Devices

System-level design trade-offs for truly wearable wireless medical devices

Exploiting Spatial Degrees of Freedom for High Data Rate Ultrasound Communication with Implantable Devices

An area efficient inductorless super-regenerative receiver front-end for biomedical implant devices

Wireless Power Transfer Techniques for Implantable Medical Devices: A Review

Wireless Switch for Implantable Medical Devices Based on Passive RF Receiver