Abstract:A series of TiO2-SiO2 composite sols have been synthesized using titanium (IV) isopropoxide and tetraethyl orthosilicate as precursors under acidic conditions. The stability of the binary sols is improved by a prehydrolysis step of tetraethyl orthosilicate. Assisted by heat treatment, the refractive index of the TiO2-SiO2 hybrid films obtained can be tuned in a wide range. On the basis of film optical constants derived from fitting of transmittance spectrum, two types of antireflection coatings with quarter-half and quarter-half-quarter multilayer structures are designed, and ordered mesoporous SiO2 film and dense SiO2 film are proposed to be used as the top layer, respectively. According to theoretical design requirements, the two antireflection coatings are successfully constructed by selecting the TiO2-SiO2 films with appropriate refractive index as the other layers. The average transmittance of the triple-layer coating at 400–800 nm is 98.74%, and that of the double-layer coating even reaches 99%. Meanwhile, the two types of multilayer coatings show good mechanical properties, which benefit from the tough skeleton of each layer. X-ray reflectivity measurements were also performed on the multilayer structures and the obtained thickness of each layer is consistent with that in the theoretical design. The results show that precise control of film thickness and refractive index is achievable using sol-gel techniques. Owing to excellent control on sol composition, the practical sol-gel route has high potential for the production of antireflective coatings.The double-layer and triple-layer broadband antireflection coatings are successfully constructed based on the optimal combination of TiO2-SiO2 hybrid films and SiO2 films by dip coating.

Fabrication And Optical Properties Of Sol-Gel Derived Interference Coating For High Power Laser Applications

A novel trilayer antireflection coating using dip-coating technique

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Preparation of high refractive index TiO_2 thin film via sol-gel process

Characterization and optical propagation loss of sol-gel derived TiO2/SiO2 films

Broadband Antireflective Coatings with Different Film Designs by Sol-Gel Method

Sol-gel synthesis of TiO2-SiO2 hybrid films with tunable refractive index for broadband antireflective coatings covering the visible range

Characteristics of laser-densified and conventionally heat treated sol–gel derived silica–titania films

Interference coating by hydrophobic aerogel-like SiO2 thin films

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Sol-Gel Preparation and Optical Nonlinearity of CdS Microcrystallite-Doped SiO2-TiO2thin Films

Transparent Dielectric TiO2/SiO2 Coatings for Thermal Shielding and Self-Cleaning Applications

Low-Temperature Preparation of SiO2/Nb2O5/TiO2–SiO2 Broadband Antireflective Coating for the Visible via Acid-Catalyzed Sol–Gel Method

Study on Organosilicone Composite Antireflective Coating with High Laser Damage Threshold for Ti-Sapphire

Design and Sol–gel Preparation of a Six-Layer Tri-Wavelength ORMOSIL Antireflective Coating for a High Power Laser System

Modified Porous Silica Antireflective Coatings with Laser Damage Resistance for Ti：sapphire

A Hydrophobic Ultralow Refractive-Index Silica Coating Towards Double-Layer Broadband Antireflective Coating with Exceptionally High Vacuum Stability and Laser-Induced Damage Threshold

Sol–gel preparation of SiO2/TiO2/SiO2–TiO2 broadband antireflective coating for solar cell cover glass

High-reflection Optical Thin Films Based on SiO2/TiO2 Nanoparticles Multilayers by Dip Coating

Design and preparation of SiO 2/TiO 2/SiO 2-TiO 2 antireflective coatings with excellent abrasion-resistance and transmittance via sol-gel process

Template‐Free Sol‐Gel Preparation of Superhydrophobic ORMOSIL Films for Double‐Wavelength Broadband Antireflective Coatings