Abstract:Background: Monolithic or semi-monolithic detectors are attractive for positron emission tomography (PET) scanners with depth-of-interaction (DOI) capability. However, they often require complicated calibrations to determine the interaction positions of gamma photons. Purpose: We introduce a novel hybrid detector design that combines pixelated and semi-monolithic elements to achieve DOI capability while simplifying the calibrations for positioning. Methods: A prototype detector with eight hybrid lutetium-yttrium oxyorthosilicate (LYSO) layers having dimensions of 25.8 × 12.9 × 15 mm3 was constructed. The energy-weighted and energy-squared weighted averages were used for estimating the x- (pixelated direction) and y-positions (non-pixelated direction). Pseudo-pixels were defined as discrete areas on the flood image based on the crystal look-up table (LUT). The intrinsic spatial resolutions in the pixelated and non-pixelated directions were measured. The ratio of the maximum to the sum of the multipixel photon counter (MPPC) signals was used to estimate the DOI positions. The coincidence timing resolution (CTR) was measured using the average and energy-weighted average of the earliest n time stamps. Two energy windows of 250-700 and 400-600 keV were applied for the measurements. Results: The pattern of the flood images showed discrete event clusters, demonstrating that simple calibrations for determining the x- and y-positions of events could be achieved. Under 400-600 keV energy window, the average intrinsic spatial resolutions were 1.15 and 1.34 mm for the pixelated and non-pixelated directions; the average DOI resolution of the second row of pseudo-pixels was 5.1 mm in full width at half maximum (FWHM); when using the energy-weighted average of the earliest four-time stamps, the best CTR of 350 ps was achieved. Applying a broader energy window of 250-700 keV only slightly degrades the DOI resolution while maintaining the intrinsic resolution; the best CTR degrades to 410 ps. Conclusions: The proposed hybrid detector concept was verified, and a prototype detector showed high performance for 3D positioning and timing resolution. The novel detector concept shows promise for preclinical and clinical PET scanners with DOI capability.

Online Parameter Calibration For Energy Discrimination In Trans-Pet

A Design Implementation of the Central Process Module for an In-Beam PET in HICTD

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

Online Self Adaptive Calibration Front-End Electric Design for A High Resolution Micropet

A New Module-Level Parameter Interfusion Ratio (Ir) To Evaluate The Performance Of Pet Detector Block

Design And Initial Performance Evaluation Of A Novel Pet Detector Module Based On Compact Sipm Arrays

Sub-Detector Unit Timing Calibration for Brain Pet Based on L1-Norm Constraint

Pet Image Resolution Uniformity Improvements Using Deep Learning

An Iterative Energy-Centroid Method for Recalibration of PMT Gain in PET or Gamma Camera

DESIGN OF A NEW DEPTH ENCODING DETECTOR FOR PET

State-Space Reconstruction of Pet Parametric Maps

Evaluation of a Prototype of New Position-Sensitive Detector for a Small Animal PET System

Monolithic Pet Detector Calibration Using Uncollimated Source and Gamma Interaction Position Distribution Constraint

Prototype design of singles processing unit for the small animal PET

Energy and Timing Measurement with Time-Based Detector Readout for PET Applications: Principle and Validation with Discrete Circuit Components.

Design and characterization of a hybrid PET detector with DOI capability

An FPGA Based energy correction method for one-to-one coupled PET detector: model and evaluation

Energy And Timing Measurement Of A Pet Detector With Time-Based Readout Electronics

Evaluation of Signal Energy Calculation Methods for A Light-Sharing Sipm-Based Pet Detector

Development of a Prototype PET Scanner with Depth-of-interaction Measurement Using Solid-State Photomultiplier Arrays and Parallel Readout Electronics.

A multi-functional front end readout electronics system for PET detector application