Abstract:High yield of petrochemicals, such as light olefins and aromatics, is an important way for low-carbon utilization of petroleum. Based on China’s energy structure and technological advantages in the field of catalytic cracking, the direct production of light olefins and aromatics from heavy feedstock oil under the confinement of molecular sieves is an important development direction of China’s oil refining industry. It poses great challenges to the design of multi-phase reactors. Counter-current interaction between feed-oil and deep-cracking catalysts under high severity should be achieved to prevent preferential adsorption of heavy aromatics, reduce diffusion resistance in zeolitic nanopores, and boost deep cracking of short-chain alkanes. Millisecond residence time and plug-flow residence time distribution should be obtained to inhibit secondary reactions and reduce dry gas and coke production. This review focuses on the progress of discrete transport, reaction, and deactivation processes in the catalytic cracking of heavy oil directly to chemicals, as well as the progress of gas-solid heterogeneous reaction engineering and other related fields. The latest research work on the discrete adsorption-diffusion phenomenon and host-guest interactions of small molecules in zeolites are introduced, and it is proposed to use facet-selective nanosized zeolites with high resistance to coke formation and gas-solid counter-current contact plug flow reactors to overcome the above challenges. Finally, the multi-stage downer catalytic pyrolysis（MDCPTM） developed by Tsinghua University is introduced, which uses multi-stage downers in series while achieving both millisecond-level plug-flow within one stage and counter-current gas-solids interaction between each stage. In the 1 kg/h pilot plant,MDCPTM can gain excellent production distribution [51.54%（mass） yield of light olefins and 80.78%（mass）selectivity of BTEX in gasoline]. With MDCPTM as the core unit, the process, i.e., heavy oil to chemicals（HOTC）, is reported where the yield of the total chemicals can be up to 75%（mass）, with carbon emission reduced by more than 70% compared with existing technologies.

Economics-Oriented NMPC of Two-Stage-Riser Catalytic Pyrolysis Processes for Maximizing Propylene Yield

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Steady-state Multiplicity Analysis of Two-Stage-riser Catalytic Pyrolysis Processes

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Techno-Economic Analysis of Methanol to Propylene Process

Simultaneous Optimization and Control for Polypropylene Grade Transition with Two-Layer Hierarchical Structure

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process*

Hydrogenation and TMP Coupling Process: Novel Process Design, Techno-Economic Analysis, Environmental Assessment and Thermo-Economic Optimization

Systematic Control Structure Evaluation of Two-Stage-riser Catalytic Pyrolysis Processes

Robust Design and Operations of Hydrocarbon Biofuel Supply Chain Integrating with Existing Petroleum Refineries Considering Unit Cost Objective

Analysis of thermodynamic equilibrium yield and process simulation for catalytic pyrolysis of light hydrocarbons based on one set of independent reactions

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment

One-step leap in achieving oil-to-chemicals by using a two-stage riser reactor: Molecular-level process model and multi-objective optimization strategy

Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

Rapid Identification of Optimized Process Parameters Via RSM for the Production of Valuable Aromatic Hydrocarbons Using Multiphase Catalytic Pyrolysis of Mixed Waste Plastics