Abstract:Drag reduction is a common phenomenon in various fields, such as enhanced heat transfer process of micro-channels, or fuel-coolant interaction (FCI) during severe accidents in nuclear power plants. It significantly affects the solidification process of hot particles and the likelihood of occurrence of vapor explosion, as well. In this work, theoretical modeling of the drag reduction influenced by film boiling heat transfer on a spherical body is conducted, and a fitting method is adopted to obtain a semi-empirical model of drag coefficient (CD), which can be described as a function of particle Froude number (Frp), entrainment Reynolds number (Reα), and the ratio of steam density to coolant density (ρ0). There seems to be a positive relationship between Reα and CD, however, negative relationships occur between Frp and CD, and between ρ0 and CD. Verifications against single effect experiments and an integral experiment under different initial conditions for a hot solid/melts moving downward in the coolant, and several classical correlations of convective heat transfer and drag coefficient under non-isothermal conditions strongly ensure the accuracy of the present physical model. It can be evaluated from the present model that a negative relationship between the drag coefficient and Reynolds number still occurs in turbulent regime, and there is a significant difference of CD under different sphere diameters in turbulent regime, which haven't been recognized and presented by various classical models yet. The present work can guide to solve the issue of drag reduction during FCI or thermal management and provide a new understanding of mass, momentum, and heat transfer under multi-phase flow conditions which may take place in different kinds of chemical reactions, as well.

ICONE15-10542 APPLICATION OF INTERFACE TRACKING METHOD TO INVESTIGATE SOME PHENOMENA INVOLVED IN FUEL-COOLANT INTERACTIONS

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

ICONE15-10736 EXPERIMENTAL STUDY ON LIQUID FILM BEHAVIOR IN 3X3 ROD BUNDLE CHANNEL SIMULATED NUCLEAR FUEL ASSEMBLY

Examination of Appropriate Formulations for Velocity and Pressure Calculation Methods at Interfacial Region on Collocated Physical Variables' Distribution

Numerical Simulation of 3d Liquid Sloshing Motion with Solid Particles Using Finite Volume Particle Method

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

A Tracking Algorithm of Vapor-Liquid Interfaces for Pulsating Heat Pipe: Theoretical and Experimental Validation at Liquid Nitrogen Temperature

Appropriate Formulations for Velocity and Pressure Calculations at Gas-liquid Interface with Collocated Variable Arrangement

Direct simulation of interfacial flows for multi-phase and multi-component mixtures using the particle method

ICONE23-1996 CFD SIMULATIONS OF THERMAL MIXING AT ECC SAFETY INJECTION FOR SINGLE PHASE AND AIR-WATER BUBBLY PHASE FLOW

The evaporation and condensation model with interface tracking

Numerical Investigation of Melt Fragmentation in Sodium-Cooled Fast Reactor Based on Moving Particle Method

Interface Tracking Simulation for Subcooled Flow Boiling Using VOSET Method

Interfacial phenomena and heat transfer associated with multi-droplet impact on flowing liquid film

Numerical investigation of micrometer sized droplet impingement on micro grooved surfaces

Analysis of wave influence on steam condensation with non-condensable gases using cfd

Evaporating Interface In A Capillary Tube With High Heat Flux Induced By Micro Diffusion Flame

Detailed Numerical Simulation of Multi-scale Interface-Vortex Interactions of Liquid Jet Atomization in Crossflow

Theoretical modeling of the drag reduction influenced by film boiling heat transfer on a spherical body

Three-phase VOF modeling of water jet – molten metal interaction

A Coupled Vaporization Model Based on Temperature/species Gradients for Detailed Numerical Simulations Using Conservative Level Set Method