Automotive Wash Effluent Treatment Using Combined Process of Coagulation/Flocculation/Sedimentation–Adsorption
Márcia Teresinha Veit,Ítalo Gustavo Vargas Novais,Patricia Trevisani Juchen,Soraya Moreno Palácio,Gilberto da Cunha Gonçalves,Jéssica Caroline Zanette
DOI: https://doi.org/10.1007/s11270-020-04862-x
2020-09-21
Abstract:In the treatment of wastewater from vehicle washing, the coagulation/flocculation process using inorganic coagulant is mostly applied; it may or may not be combined with other processes. In literature, few studies use natural coagulants and assess the surfactants' removal among the physical-chemical parameters, particularly using the adsorption process. In order to fill this knowledge gap, this work aimed to treat the car wash wastewater, applying a combined process of coagulation/flocculation/sedimentation (C/F/S) and adsorption. Process efficiency was evaluated according to the removal of color, turbidity, total solids, volatile solids, total dissolved solids, chemical oxygen demand and surfactants. For primary effluent treatment, C/F/S experiments were performed with Tanfloc SG to investigate the influence of the natural coagulant concentration in color and turbidity removal efficiency. The results showed that 220 mg L<sup>−1</sup> was the best coagulant concentration (turbidity = 97.5%; color = 92.5%) (<i>p</i> < 0.05). The supernatant of the C/F/S process was applied to the sequential adsorption process (kinetics and isotherm) with mineral activated carbon. The equilibrium time of the kinetic experiment was established after 2 h of contact, and the Langmuir isotherm model best described the surfactant adsorption behavior (<i>R</i><sup>2</sup> = 0.93; <i>q</i><sub>max</sub> = 5.65 mg g<sup>−1</sup>). The combined process enhanced the treatment efficiency achieving an overall removal efficiency of 97.3% for color, 98.8% for turbidity, 92.6% for chemical oxygen demand, and 97.2% for surfactants. The combined process proved to be promising for the treatment of car wash wastewater, presenting a reduction surfactant concentration and on the other parameters evaluated, contributing to environmental sustainability.