Abstract:This paper presents a fully integrated wireless electrocardiogram (ECG) SoC implemented in asynchronous architecture, which does not require system clock as well as off-chip antenna. Several low power techniques are proposed to minimize power consumption. At the system level, a newly introduced event-driven system architecture facilitates the asynchronous implementation, thus removes the system clock leading to a true ECG-on-chip solution. A DC-coupled analog front-end is introduced together with a baseline stabilizer to boost the input impedance to 3.6 GQ and mitigate the electrode offset, which is less sensitive to motion artefact and contact impedance imbalance, making it well suited for dry-electrode based applications. Level-crossing analog-to-digital converter (LC-ADC) is employed to take the advantage of burst nature of ECG signal leading to at least 5 times reduction in sampling points compared to Nyquist sampling. A digitally implemented impulse-radio ultra-wideband transmitter is seamlessly integrated with LC-ADC and an on-chip antenna for wireless communications. Implemented in 0.13 μm CMOS technology, the ECG-on-chip consumes 2.89 μW under 1.2 V supply while transmitting the raw ECG data, which attains one order of magnitude lower than the current state-of-the-art designs. The fully integrated ECG SoC requires no external clocks and off-chip antenna, making it a good candidate for low cost and disposable wireless ECG patches, such as epidermal electronics.

A 2.89-Μw Clockless Wireless Dry-Electrode ECG SoC for Wearable Sensors.

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

A 180 Nm-Cmos Asymmetric UWB-RFID Tag with Real-time Remote-monitored ECG-sensing

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

A 0.7-V 17.4- μ W 3-lead wireless ECG SoC

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

An Ultra-Low Power ECG Acquisition and Monitoring ASIC System for WBAN Applications

A 300-mV 220-nW event-driven ADC with real-time QRS detection for wearable ECG sensors

A Low-Power Portable ECG Sensor Interface with Dry Electrodes

An Autonomous Wireless Sensor Node With Asynchronous ECG Monitoring in 0.18 μ m CMOS

Design of Ultra-Low-Power Electrocardiography Sensors

A Wireless 8-Channel ECG Biopotential Acquisition System for Dry Electrodes

A 1.92 Μa Always-on ECG Monitoring Mixed-Signal SoC for Implantable Medical Application.

A Wearable ECG Monitoring Device with Flexible Embedded Denoising and Compression

A Low Power Level-Crossing ADC for Wearable Wireless ECG Sensors.

A 74-μW 11-Mb/s Wireless Vital Signs Monitoring SoC for Three-Lead ECG, Respiration Rate, and Body Temperature