Abstract:Aiming to investigate the impact of cross-sectional size on the close-in blast performance of reinforced concrete (RC) beams, the local damage features and structural responses of RC beams with varying cross-sectional widths and depths subjected to close-in explosions were investigated experimentally and numerically. Experiments were conducted on ten RC beams with a cross-sectional size of 25 cm × 12.5 cm to study the influence of scaled distance and charge mass on the local damage size and structural responses (displacement and reaction force). The results indicate that the blasting face damage to tested beams, such as the crushing crater of concrete cover and side peeling-off damage, is more sensitive to the scaled distance (intensity of applied blast loads) compared to the rear spalling damage. And the peak reaction force exhibited a gradual increase within the range of 0.5 m/kg 1/3 , eventually reaching an average maximum value of 93.5 kN, and remained unchanged after the scaled distance was greater than 0.5 m/kg 1/3 , indicating that the dynamic load-carrying capacity of tested beams increased with the increasing scaled distance and the maximum dynamic load-carrying capacity of these beams is around 93.5 kN. Furthermore, a numerical model of RC beams subjected to close-in explosions was established based on the Fluid-Structure-Interaction (FSI) method. For validation, the local damage morphology and sizes of RC beams and their dynamic responses (displacement and reaction force) were computed and compared with the corresponding experimental results, concluding that the numerical results are in good agreement with the experimental findings. A parametric analysis was conducted to study the impact of cross-sectional size on the development process of initial local damage, stress distribution in cross sections, local damage sizes, and structural responses. Moreover, a damage index of the dynamic load-carrying capacity was derived from the relationship between the normalized maximum reaction force and the normalized maximum displacement to assess the damage degree of RC beams with varying cross-sectional sizes. This work can serve as a partial reference for relevant research.

Numerical Simulation of Damage of Low-Rise Rc Frame Structures with Infilled Masonry Walls to Explosive Loads

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Numerical Simulation Study of Progressive Collapse of Reinforced Concrete Frames with Masonry Infill Walls under Blast Loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Spallation Mechanism of RC Slabs under Contact Detonation

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Numerical analysis of reinforced concrete buildings subjected to blast load

Numerical Study of Damage Modes and Assessment of Circular RC Pier under Noncontact Explosions

Residual axial capacity of circular reinforced concrete columns subjected to contact explosions

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Numerical simulation of autoclaved aerated concrete masonry wall subjected to close-in explosion and the structural damage assessment

Numerical analysis of the local damage of RC beams under close‐in explosions based on the calibrated Karagozian & Case (K&C) concrete model

Damage Analysis of 3D Masonry Structures under Explosion Shock Waves Based on the CDEM

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Close-in blast performance of RC beams with varying cross-sectional sizes and damage assessment based on the dynamic load carrying capacity

Numerical Investigation of a New Structural Configuration of a Concrete Barrier Wall under the Effect of Blast Loads

Near Range Explosion Resistance of UHPFRC Panels in Wide Scaled Distances: Experimental Study and Stochastic Numerical Modelling

Finite Element Simulation of FRP Strengthened Reinforced Concrete Slabs under Two Independent Air Blasts