Application Of Industrial-Grade Magnesium Oxide In The Alkaline Hydrogen Peroxide Bleaching Of Poplar Ctmp
Song Han,Wei Liu,Junhua Zhang,Zhaoxia Long,Qingxi Hou
2012-01-01
Abstract:CTMP has developed rapidly in recent years. Sodium hydroxide (NaOH) was usually used as the alkali source in hydrogen peroxide bleaching. The strong alkalinity of NaOH can cause the dissolution of carbohydrates, which is responsible for the increased COD and BOD of the effluent. It also leads to the formation of anionic trash that will affect the wet-end of the paper machine. Magnesium oxide (MgO), a weak alkali, can replace sodium hydroxide as the alkali source during the hydrogen peroxide bleaching process and has received much attention recently. In this work, four different-kinds of industrial- grade MgO, including a light MgO, a high purity MgO and two kinds of heavy MgO marked with MgO-1, MgO-2, MgO-3 and MgO-4, respectively, were used in the peroxide bleaching process of poplar CTMP. Firstly, the particle size, purity, chemical reaction activity and transition metal ions content of these four varieties of MgO were determined. And then, the bleaching efficiency of these four different kinds of MgO in the hydrogen bleaching of CTMP at different substitution percentage of MgO for NaOH were determined by comparing optical properties, strength properties of bleached CTMP, as well as effluent load and cost. The results showed that MgO-4 was the best industrial-grade MgO applied into hydrogen peroxide bleaching of polar CTMP at the substitution percentage of 25% of MgO for NaOH among these four varieties of MgO considering bleaching results and cost. And the properties of MgO, i.e. particle size, purity, chemical reaction activity and transition metal ions content used to measure the effects of industrial-grade MgO in hydrogen peroxide bleaching were not incomplete.