Abstract:The bio-refining process of bamboo is more challenging compared to wood due to its dense and stabilized complex polymer structure, as well as its abundance of degradation-resistant components. Consequently, the bio-refining of bamboo requires more energy and time consumption compared to the bio-refining of wood. In this study, co-cultured microorganisms were utilized for the pretreatment of bamboo to improve pulping performance, reduce consumption, and increase efficiency. These microorganisms were constructed by combining environmental microorganisms found in bamboo pulp with Bacillus sp. that were self-screened. The results of 16S rRNA analysis showed that the genera Proteobacteria, Firmicutes, Bacteroidota, and Actinobacteriota gradually became dominant during the treatment process. Additionally, the PICRUSt results indicated that the co-culture microbial consortium C strategy strengthened key enzyme activities related to the degradation of bamboo lignocelluloses. The microbial consortium pretreatment resulted in removing lignin and hemicellulose at rates of 21.96% and 26.21%, respectively. This process also caused a decrease in the crystalline index, indicating the presence of disordered crystalline regions. This change was beneficial for the subsequent Kraft pulping process. Compared to the conventional bamboo pulp, the yield of pretreated bamboo pulp increased slightly, while the cellulose purity and paper properties were significantly superior. The obtained Kraft pulp, which underwent microbiological pretreatment, met the requirements for superior Kraft pulp products despite a 65 min decrease in cooking time and a 10 degrees C decline in maximum cooking temperature. This study proves that co-cultured microbial consortium used for pretreating bamboo are beneficial for bamboo Kraft pulping. This approach can be considered environmentally friendly and leads to energy saving and cost reduction in bamboo bio-refining processes.

On bleaching bamboo pulp preparation in Milox solvent method

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Influence of Potassium Permanganate Pretreatment on Mechanical Properties and Thermal Behavior of Moso Bamboo Particles Reinforced Pvc Composites

Research on Milox Pulping of Non-Wood Raw Material

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Mechanical and thermal properties of sodium silicate treated moso bamboo particles reinforced PVC composites

Study of Kinetics of H2O2 Bleaching of Bamboo Pulp

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Effect of Hydrothermal Pretreatment on the Properties of Moso Bamboo Particles Reinforced Polyvinyl Chloride Composites

Effect of Low‐concentration Alkali Solution Pretreatment on the Properties of Bamboo Particles Reinforced Poly(lactic Acid) Composites

One-Step Treatment for Upgrading Bleached Bamboo Pulp to Dissolving Pulp High Solvency in Green Alkali/Urea Aqueous Solution

Efficient preparation of high-purity cellulose from moso bamboo by p-toluenesulfonic acid pretreatment

Study on Xylanase-Aided Bleaching of Wheat Straw KP

Investigation on the Application of Industrial Grade MgO in the Alkaline Peroxide Bleaching of Poplar CTMP

Improving Pulping Performance as Well as Reducing Consumption and Increasing Efficiency via Microbial Consortium Pretreating Bamboo

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Optimum conditions for natural bamboo fiber oxidation by response surface method

Effect of hemicellulose content on the solution properties of cellulose carbamates in NaOH/ZnO aqueous system

Bleaching flax roving with poly(acrylic acid) magnesium salt as oxygen bleaching stabilizer for hydrogen peroxide