Abstract:In order to treat hydrogen sulfide(H2S), a series of amine-modified MOFs with high sulfur capacity are prepared by impregnating UiO-66 with different steric hindrance amines (MEA, DEA, TEA). Among them, the UiO-66-T material modified by TEA not only well maintains the high specific surface area and micropore structure of the raw material, showing the specific surface area of 257 m2/g and the pore volume of 0.18 cm3/g, but also shows the high hydrogen sulfide adsorption capacity of 2.79 mmol/g. This is because the action of steric hindrance makes the TEA molecules suitable for the 9 × 9 × 9 Å space box fail to enter the micropore depth when entering UiO-66 with 8 Å and 11 Å double-pore cage structure. Therefore, it is difficult for amine molecules to interact with the metal center of the MOFs structure, so that the modified UiO-66-T not only maintains the porosity and stability of the raw material, but also increases the acid-base interaction force with hydrogen sulfide by introducing amine molecules. The binding energy of both is 352.84 kJ/mol, and it has a stable adsorption binding configuration. The penetration experiment results show that the adsorption capacity of hydrogen sulfide is determined by the amine load on the surface of the adsorbent. The mass transfer kinetics of UiO-66 series materials is analyzed by using the quasi-first-order kinetic model, quasi-second-order kinetic model and internal diffusion model. The correlation coefficients R2 fitted between the model and the experimental results are all above 0.9. Therefore, the effect of van der Waals force on the adsorption process of UiO-66 series materials and hydrogen sulfide is greater than that of chemical bond force, and intra-particle diffusion is the actual key step and main diffusion mechanism in the adsorption process of H2S.

Removal of minor concentration of H 2 S on MDEA-modified SBA-15 for gas purification

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Microwave-assisted Synthesis of Zn-Fe Adsorbent Supported on Alumina: Effect of Zn to Fe Ratio on Syngas Desulfurization Performance

Fabrication and performance of MEA/DEA/TEA modified UiO-66 material for removing low concentration hydrogen sulfide at normal temperature environment

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Hydrogen Sulfide Adsorption from Natural Gas Using Silver-Modified 13X Molecular Sieve

Influence of MEA and piperazine additives on the desulfurization ability of MDEA aqueous for natural gas purification

Investigation into the Enhancement of Gas-Liquid Mass Transfer of Absorption of H 2 S by MDEA with Carbon Quantum Dots

Aminated polyacrylonitrile fibers for the removal of hydrogen sulfide from natural gas at room temperature

Enhanced selective adsorption of H 2 S from CO 2 by incorporating methylated polyethyleneimine into a porous carbon matrix

Selective Absorption of H2S from a Gas Mixture with CO2 in a Microporous Tube-in-tube Microchannel Reactor

Selective adsorption of trace gaseous ammonia from air by a sulfonic acid-modified silica xerogel: Preparation, characterization and performance

Room-temperature Hydrogen Sulfide Removal with Zinc Oxide Nanoparticle/molecular Sieve Prepared by Melt Infiltration

Cu-Zn oxides nanoparticles supported on SBA-15 zeolite as a novel adsorbent for simultaneous removal of H2S and Hg0 in natural gas

Adsorption of Hydrogen Sulfide at Low Temperatures Using an Industrial Molecular Sieve: An Experimental and Theoretical Study

Synthesis of spherical amine-functionalized silica molecular sieve and application as selective adsorbents for aromatic hydrocarbons analysis

Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde

Preparation and deodorization behavior of copper-modified mesostructured MCM-41 for the treatment of malodorous gas in sewage plants

Experimental study on removal of hydrogen sulfide gas by spray and bubble blowing: A comparative study

Facilely tuning the morphologies of tertiary amine-functionalized SBA-15 for optimizing selective SO 2 capture