Abstract:Previous experimental investigations (Hirakata et al. Int J Fract 145:261–271, 2007) have demonstrated that Si/Cu/SiN/Pt/C nano-cantilever is delaminated along the interface between Cu and Si layers when subjected to monotonically bending load, and the measured load-displacement relationship shows a nonlinear behavior. Based on the continuum mechanics model, this study carries out numerical simulations on the crack nucleation and propagation along the Si/Cu interface in order to clarify the effect of plasticity on the fracture behavior of the ductile nano-component. Exponential type of cohesive zone model (CZM) combined with finite element method was adopted to characterize the constitutive relationship of the Si/Cu interface. Two sets of simulations are performed, i.e., Cu layer obeys either linear elastic or Ramberg–Osgood elasto-plastic constitutive relation. The characteristic parameters of interfacial adhesion are extracted through calibration via experimental results. The simulation results indicate that (i) cohesive strength and work of separation are the dominating CZM parameters, and the exponential CZM is suitable for describing the interfacial delamination between the Cu and Si film layers; (ii) the Cu film layer in this nano-cantilever more favorably obeys a linear elastic constitutive relation; (iii) comparing to bulk Cu, nano-scale Cu has a much higher yield stress and hardening rate, which leads to little plastic deformation of the nano-cantilever specimen during the entire delamination process. The numerical predictions are in good agreement with the experimental results, wherein brittle fracture occurred during the Si/Cu interfacial delamination. And the nonlinear load-displacement behavior observed by the tests may be due to the cohesive law of the Si/Cu interface, instead of the plastic deformation of the Cu film layer.

Atomistic Mechanisms of Moisture-Induced Fracture at Copper-Silica Interfaces

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

The Effect of Cu Orientation on Fracture Location in Cu<inf>3</inf>Sn-Cu Interface Structure Under Monotonic Loading Condition by Molecular Dynamics Simulation

Comprehensive Atomistic Modeling of Copper Nanowires-Based Surface Connectors

Influence of Defects During the Tensile Deformation of Cu–Al Joint Interfaces at the Nano Scale

Fracture toughness of Cu-Sn intennetallic compounds in electronic packages

Improving thermal stability and Hall-Petch breakdown relationship in nanocrystalline Cu: A molecular dynamics simulation study

Corrosion-induced fracture of Cu-Al microelectronics interconnects

Nanoscale ductile fracture and associated atomistic mechanisms in a body-centered cubic refractory metal

Fracture Behavior of Functionally Graded Joint Interfaces Between Copper and Aluminum at Nano-Scale

Fracture, my friend: the cutting of gummy metals

Study on the Influence of Defects on Fracture Mechanical Behavior of Cu/SAC305/Cu Solder Joint

Reinvestigation of the effect of plasticity on delamination process of Si/Cu interface in a ductile nano-cantilever

Cohesive Zone Simulation on Dynamic Fracture at the Interfaces of a Single Solder Joint

Molecular dynamics simulations of interface structure and deformation mechanisms in metal/ceramic composites under tension

OS13F017 Fracture Criterion for Cracking along the Cu/Si Interface in Nanoscale Thin Films by Cohesive Zone Model

Study on the Mixed-Mode Fracture of the Epoxy-Cu Interface

Orientation-dependent plastic flow in nanoscratching of copper surfaces

A robust nanoscale experimental quantification of fracture energy in a bilayer material system

Phase Field Crystal Simulation of Morphological Evolution and Propagation of Microcracks in the Intermetallic Compound Layer of Sn/Cu Solder Interconnects