Abstract:Fermi-level pinning (FLP) effect was widely observed in thin-film transistors (TFTs) with van der Waals (vdW) layered semiconductors (organic or two-dimensional) when contact electrodes were thermally evaporated1-3. Intensive investigation was implemented for formation of FLP-free interfacial states by eliminating chemical disorder and crystal defects arising from metal deposition4-9. However, technical and principal challenges are still existing towards high-yield, wafer-scalable and low-cost integration of TFT devices. Herein, we developed a general, scaling-up strategy to fabricate large-scale, high-performance FLP-free organic TFT (OTFT) arrays by using printed vdW contacts consisting of MXene composite electrodes and 2, 7-dioctyl [1] benzothieno [3, 2-b] [1] benzothiophene (C8BTBT). Room-temperature processes allow for a physically stacked junction without any structural or chemical damages. The OTFT arrays can be printed on a large-area silicon wafer or plastic film with 100% yield, exhibit ultrahigh field-effect mobility ({\mu}_FE) over 17.0 square centimetres per volt per second (cm2 V-1s-1), high on/off ratio exceeding 108, relatively low contact resistance of 3k ohm micrometres. The underlying mechanism for the high device performance was unveiled by Kelvin Probe Force Microscopy (KPFM) combined with theoretical simulation. The results indicate that work function (W_F) of the printed electrodes can be tuned at a wide range of 4.8-5.6 eV, thus significantly lowering the charge-injection barrier at the contact interfaces with ideal FLP-free character (the interfacial factor reaches 0.99 \pm 0.02). This study paves a general strategy for achieving large-scale, high-performance thin-film electronics.

An Organic Ferroelectric Field Effect Transistor with Poly(Vinylidene Fluoride-Co-Trifluoroethylene) Nanostripes As Gate Dielectric

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

Junctionless Ferroelectric Field Effect Transistors Based on Ultrathin Silicon Nanomembranes

Pentacene Organic Ferroelectric Transistors with [P(vdf-Trfe)] Gate by Langmuir-Blodgett Process

High Performance Top-Gated Ferroelectric Field Effect Transistors Based on Two-Dimensional ZnO Nanosheets

An Organic/Si Nanowire Hybrid Field Configurable Transistor

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

Molecular layer modulation of two-dimensional organic ferroelectric transistors

Two-dimensional negative capacitance transistor with polyvinylidene fluoride-based ferroelectric polymer gating

Flexible graphene field effect transistor with ferroelectric polymer gate

A Ferroelectric Semiconductor Field-Effect Transistor

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Nanoscale flexible organic thin-film transistors

2D Negative Capacitance Field-Effect Transistor with Organic Ferroelectrics

Tunnel Electroresistance Through Organic Ferroelectrics

Controllable Hysteresis and Threshold Voltage of Single-Walled Carbon Nano-tube Transistors with Ferroelectric Polymer Top-Gate Insulators

Sub-60 mV/decade switching in 2D negative capacitance field-effect transistors with integrated ferroelectric polymer

Facile and Solvent-Free Fabrication of Highly Oriented Ferroelectric Copolymer Thin Films and Its Application in Ferroelectric Field Effect Transistors

Transparent Junctionless Electric-Double-Layer Transistors Gated by a Reinforced Chitosan-Based Biopolymer Electrolyte

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Understanding Quasi-Static and Dynamic Characteristics of Organic Ferroelectric Field Effect Transistors