Abstract:Cathode buffer layer (CBL) introduced between the active layer and cathode is crucial for selectively transporting electrons and blocking holes for polymer solar cells (PSCs). Calcium (Ca) is the most commonly used CBL in conventional-structure bulk heterojunction (BHJ) PSC devices, but is prone to oxidation due to its high reactivity, inhibiting its practical applications. Herein, we applied an alcohol-soluble fullerene aminoethanol derivative (C60-ETA) as an efficient CBL surpassing Ca in conventional-structure BHJ-PSC devices, leading to obvious efficiency enhancement with the best power conversion efficiency (PCE) reaching 9.66%. C60-ETA CBL was applied in PSC devices based on three different photoactive layer systems, including poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene-co-3-fluorothieno[3,4-b]thiophene-2-carboxylate]:[6,6]-phenyl C71-butyric acid methyl ester (PTB7-Th:PC71BM), polythieno[3,4-b]thiophene-co-benzodithiophene (PTB7):PC71BM and poly(4,8-bis-alkyloxybenzo(l,2-b:4,5-b′)dithiophene-2,6-diylalt-(alkylthieno(3,4-b)thiophene-2-carboxylate)-2,6-diyl) (PBDTTT-C):PC71BM, affording the best PCE of 9.66%, 8.51% and 7.19%, respectively, which are all higher than those of the corresponding devices based on the commonly used Ca CBL. The mechanism of efficiency enhancement of C60-ETA CBL relative to Ca is studied, revealing that C60-ETA CBL may induce improvements on both the interfacial contact between the active layer/cathode and electron transport, facilitating electron extraction by the Al cathode, and consequently leading to the increase of short-circuit current density (Jsc), which contributes primarily to the PCE improvement.

Layer-By-Layer Processed Polymer Solar Cells with Self-Assembled Electron Buffer Layer

Layer‐by‐Layer Solution‐Processed Low‐Bandgap Polymer‐PC61BM Solar Cells with High Efficiency

High‐Performance Polymer Solar Cells with Electrostatic Layer‐by‐Layer Self‐Assembled Conjugated Polyelectrolytes As the Cathode Interlayer

Layer-by-Layer-Processed All-Polymer Solar Cells with Enhanced Performance Enabled by Regulating the Microstructure of Upper Layer

Efficient Polymer Solar Cells by Lithium Sulfonated Polystyrene As a Charge Transport Interfacial Layer

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Layer‐by‐Layer Processed Organic Solar Cells with 18.02% Efficiency Enabled by Regulating the Aggregation of Bottom Polymers

High‐Performance All‐Polymer Solar Cells with a Pseudo‐Bilayer Configuration Enabled by a Stepwise Optimization Strategy

Over 18.2% efficiency of layer-by-layer all-polymer solar cells enabled by homoleptic iridium(III) carbene complex as solid additive

Over 18.1% Efficiency of Layer-by-Layer Polymer Solar Cells by Enhancing Exciton Utilization near the ITO Electrode

Bulk Heterojunction or Layer‐by‐Layer Structure PM6:L8‐BO Based Polymer Solar Cells Exhibiting an Efficiency of 17.84 % or 18.43 %

Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers

Efficient polymer solar cells utilizing solution-processed interlayer based on different conjugated backbones

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

High-Performance Small Molecule/Polymer Ternary Organic Solar Cells Based on A Layer-By-Layer Process

Solution-processed Bathocuproine Cathode Buffer Layer Towards Efficient Planar Heterojunction Perovskite Solar Cells