Abstract:Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing technology. Electrical conductivity of the polymers can be improved by blending with carbon nanotubes. In this work, formulations of acid functionalised multiwall carbon nanotubes (f-MWCNT) and poly (ethylenedioxythiophene) [PEDOT]: polystyrene sulphonate [PSS] were processed, and thin films were prepared on plastic substrates. Conductivity of PEDOT: PSS increased almost four orders of magnitude after adding f-MWCNT. Work function of PEDOT:PSS/f-MWCNT films was ~ 0.5eV higher as compared to the work function of pure PEDOT:PSS films, determined by Kelvin probe method. Field-effect transistors source-drain electrodes were prepared on PET plastic substrates where PEDOT:PSS/f-MWCNT were patterned using laser ablation at 44mJ/pulse energy to define 36 micron electrode separation. Silicon nanowires were deposited using dielectrophoresis alignment technique to bridge the PEDOT:PSS/f-MWCNT laser patterned electrodes. Finally, top-gated nanowire field effect transistors were completed by depositing parylene C as polymer gate dielectric and gold as the top-gate electrode. Transistor characteristics showed p-type conduction with excellent gate electrode coupling, with an ON/OFF ratio of ~ 200. Thereby, we demonstrate the feasibility of using high workfunction, printable PEDOT:PSS/MWCNT composite inks for patterning source/drain electrodes for nanowire transistors on flexible substrates.

Hybrid Light-Emitting Polymer Device Fabricated on a Metallic Nanowire Array

Nanowire Array Electrode in an Organic Light Emitting Diode

Nanowire Array Electrode Structure for Organic Light Emitting Diodes

Highly reliable copper nanowire electrode with enhanced transmittance and robustness for organic light emitting diodes

J212025 Fabrication of Nanowire Surface Fastener on Flexible Substrate and Its Electrical and Mechanical Properties

Nanowire Arrays Electrodeposited from Liquid Crystalline Phases

Silver Nanowires Eelectrodeposited from Reverse Hexagonal Liquid Crystals

Enhancing the Performance of Polymer Light‐Emitting Diodes by Integrating Self‐Assembled Organic Nanowires

Highly Stable Silver Nanowire Plasmonic Electrodes for Flexible Polymer Light-Emitting Devices

Fabrication of Large-Area Hybrid Nanowires Arrays As Novel Field Emitters

Dielectrophoretic-Assembled Single and Parallel-Aligned Ag Nanowire-Zno-Branched Nanorod Heteronanowire Ultraviolet Photodetectors

Polymer photovoltaic wires based on aligned carbon nanotube fibers

Electrochemical Fabrication of Conducting Polymer Nanowires in an Integrated Microfluidic System.

High-Performance Copper Nanowire Electrode for Efficient Flexible Organic Light-Emitting Diode

Laser patterned polymer/nanotube composite electrodes for nanowire transistors on flexible substrates

Fabrication Of Polydiacetylene Nanowires By Associated Self-Polymerization And Self-Assembly Processes For Efficient Field Emission Properties

Fabrication of organic copper phthalocyanine nanowire arrays via a simple AAO template-based electrophoretic deposition

Nanowire-Intensified MEF in Hybrid Polymer-Plasmonic Electrospun Filaments

Hybrid Single / Polycrystalline ZnO Nanoawl Arrays : Facile Synthesis and Enhanced Field Emission Properties {

Metal Octaethylporphyrin Nanowire Array and Network toward Electric/Photoelectric Devices