Abstract:In this study, different ignition modes and detonation initiation due to shock wave focusing are observed by combining a transient overpressure recording technique and a high-speed schlieren photography system. In plane reflection, only weak and strong ignition modes are observed; while there are three ignition modes in the 90-degree and 60-degree wedges by introducing shock wave focusing: peak local ignition mode (PLIM), boundary ignition mode (BIM), and strong ignition mode (SIM). In PLIM, the flame is generated at the apex of the wedge-shaped reflector, but the propagation speed is slow, the flame area concentrates on the apex of the reflector and maintains for a long time. In BIM, the flame is firstly generated at the apex of the wedge and quickly propagates along the tube wall; later the flame propagates slowly from the tube wall to the central unburned area. In SIM, oblique shock waves are generated when the shock waves are reflected from the wedged walls, the interaction of oblique shocks inducing the initiation of detonation. In addition, the incident shock velocity (Vi) range corresponding to different ignition modes for different shock wave focusing types is given. The lower velocity limit of SIM for planar, 90-degree, and 60-degree wedge reflectors is 980 m/s, 915 m/s, and 880 m/s, respectively. Therefore, it is more conducive to initiate the detonation wave in the 60-degree wedge with a lower speed shock wave. The instantaneous maximum pressure (P-max) and maximum pressure after ignition (P-ign) of the three reflectors are investigated corresponding to each ignition mode. It is found that P-ign and P-max can be used to determine SIM. This study provides new insight into different ignition modes in wedge reflectors due to shock focusing; the results are beneficial to understanding the physics of shock wave focusing and its mechanism of shock focusing-induced detonation. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Using Indium Tin Oxide Material to Implement the Imaging of Microwave Plasma Ignition Process

Exploring Microwave Resonant Multi-Point Ignition Using High-Speed Schlieren Imaging

Multi-Point Ignition Process induced by Microwave DischargeMulti-Point Ignition Process induced by Microwave Discharge

Microwave Plasma Multi-point Ignition Process in Methane-air Mixtures

Visual Features of Microwave Ignition of Methane-Air Mixture in a Constant Volume Cylinder

Experimental Study of Multipoint Ignition in Methane–Air Mixtures by Pulsed Microwave Power

A Method to Realize Multipoint Ignition with Microwave Plasma

Experimental Study of Influence on Microwave Plasma Ignition Combustion Performance of Pulse Microwave Signals

Experimental study of microwave resonance plasma ignition of methane–air mixture in a constant volume cylinder

Direct Observations of Reaction Zone Structure in Shock-Induced Ignition of Methane Air Mixture

Investigation of Self-Ignition Characteristics of the Microwave Plasma Torch

Development of 2.45 GHz Semiconductor Microwave System for Combustion Ignition Enhancement and Failure Analysis

Study on Microwave-Assisted Ignition Using a Novel Aero-Engine Combustor

Imaging Diagnostics and Gas Temperature Measurements of Atmospheric-Microwave- Induced Air Plasma Torch

Research Progress of ICE Microwave Ignition

Optical diagnostics of a low power—low gas flow rates atmospheric-pressure argon plasma created by a microwave plasma torch

Strengthening effect of microwave on spark ignited spherical expanding flames of methane-air mixture

Effect of Microwave Pulses on the Morphology and Development of Spark-Ignited Flame Kernel

Experimental Study on Microwave-Induced Plasma-Assisted Premixed Methane-Air Combustion

Visualization of Ignition Modes in Methane-Based Mixture Induced by Shock Wave Focusing

Two enhancements in microwave-assisted spark ignition and their causes