Abstract:This article presents experimental and computational results on ignition of nonpremixed, counterflowing jets of nitrogen-diluted methane versus heated air within a wide range of pressures, fuel concentrations, and flow strain rates. The system was brought to ignition by increasing gradually the temperature of the air stream. Each steady-state situation just prior to ignition was experimentally characterized by measuring detailed centerline axial flow velocity and temperature distributions, for ambient pressures between 0.5-8.0 atm, fuel concentrations in the range of 6%-100% methane in nitrogen, and pressure-weighted strain rates between 100-700 s(-1). In addition, each situation was modeled numerically, using detailed transport properties and full chemical kinetics based on the GRI (Gas Research Institute) Mech v1.2 mechanism. As in our previous work with hydrogen/air ignition, we have identified computationally the existence of a localized ignition kernel of maximum reactivity and heat release. In contrast to the hydrogen case, however, we have shown that heat release and the thermal feedback are indispensable at ignition in the methane/air system. The ignition temperature, defined as the boundary temperature of the air jet just prior to ignition, was found to increase with increasing flow strain rate at all pressures. This has been shown numerically to be an effect of heat and radical loss out of the ignition kernel by convective-diffusive transport. The ignition temperature decreased abruptly with increasing fuel concentration, for dilute conditions. For CH4 concentrations in excess of 20%-30%, however, the ignition temperature became insensitive to further increase in the fuel concentration. Ignition temperatures at constant pressure-weighted strain rates decreased monotonically with increasing system pressure, similar to the homogeneous explosion limits. Over this range of pressures the numerical simulation indicated that the dominant chemical pathways at ignition do not change significantly. Flux, sensitivity, and the Computational Singular Perturbation (CSP) method were used to identify the ignition chemistry and provide several simplified kinetic mechanisms. The results obtained using a skeletal mechanism M4, with 22 species and 64 irreversible reactions, were found to agree closely with those obtained using the full chemistry. The experimental data were compared with computations using several kinetic mechanisms. Copyright (C) 1997 by The Combustion Institute.

Visual Features of Microwave Ignition of Methane-Air Mixture in a Constant Volume Cylinder

Experimental Study of Multipoint Ignition in Methane–Air Mixtures by Pulsed Microwave Power

Microwave Plasma Multi-point Ignition Process in Methane-air Mixtures

Experimental study of microwave resonance plasma ignition of methane–air mixture in a constant volume cylinder

Exploring Microwave Resonant Multi-Point Ignition Using High-Speed Schlieren Imaging

Strengthening effect of microwave on spark ignited spherical expanding flames of methane-air mixture

Using Indium Tin Oxide Material to Implement the Imaging of Microwave Plasma Ignition Process

Multi-Point Ignition Process induced by Microwave DischargeMulti-Point Ignition Process induced by Microwave Discharge

A Method to Realize Multipoint Ignition with Microwave Plasma

Direct Observations of Reaction Zone Structure in Shock-Induced Ignition of Methane Air Mixture

Effect of Microwave Pulses on the Morphology and Development of Spark-Ignited Flame Kernel

Propulsive effect of microwave-induced plasma jet on spark ignition of CO2-diluted CH4-air mixture

Experimental study of microwave assisted spark ignition on expanding C2H2-Air spherical flames

Investigation of Methanol Ignition Phenomena Using a Rapid Compression Machine

Two enhancements in microwave-assisted spark ignition and their causes

Ignition of counterflowing methane versus heated air under reduced and elevated pressures

Study on Microwave-Assisted Ignition Using a Novel Aero-Engine Combustor

Experimental Research of High-Pressure Methane Pulse Jet and Premixed Ignition Combustion Performance of a Direct Injection Injector

Optical Spectroscopy Diagnosis of Methane Plasma Generated with Atmospheric Pressure Jet

Effect of Microwave Antenna Material and Diameter on the Ignition and Combustion Characteristics of ADN-Based Liquid Propellant Droplets

Development of 2.45 GHz Semiconductor Microwave System for Combustion Ignition Enhancement and Failure Analysis