Abstract:This work presents the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H2/air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H2/air mixture with a pair of cylindrical electrodes. The results show that the plasma-generated species (N2(A), N2(B), N2(a′), N2(C), O(1D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

Two enhancements in microwave-assisted spark ignition and their causes

Experimental study of microwave assisted spark ignition on expanding C2H2-Air spherical flames

Effect of Microwave Pulses on the Morphology and Development of Spark-Ignited Flame Kernel

Strengthening effect of microwave on spark ignited spherical expanding flames of methane-air mixture

Propulsive effect of microwave-induced plasma jet on spark ignition of CO2-diluted CH4-air mixture

Research Progress of ICE Microwave Ignition

Multi-Point Ignition Process induced by Microwave DischargeMulti-Point Ignition Process induced by Microwave Discharge

Research progress of microwave plasma ignition and assisted combustion

Study on Microwave-Assisted Ignition Using a Novel Aero-Engine Combustor

Microwave Plasma Multi-point Ignition Process in Methane-air Mixtures

Ignition Enhancement of Lean Kerosene Air Mixture by Multichannel Jet Enhanced Plasma Igniter

Experimental study of microwave resonance plasma ignition of methane–air mixture in a constant volume cylinder

A Method to Realize Multipoint Ignition with Microwave Plasma

Experimental Study of Influence on Microwave Plasma Ignition Combustion Performance of Pulse Microwave Signals

Experimental Study of Multipoint Ignition in Methane–Air Mixtures by Pulsed Microwave Power

Exploring Microwave Resonant Multi-Point Ignition Using High-Speed Schlieren Imaging

Interactions Between Microwaves and Smart Energetic Materials: A Review on Emerging Technologies for Ignition and Combustion Enhancement

Visual Features of Microwave Ignition of Methane-Air Mixture in a Constant Volume Cylinder

Reduction of NOx Emissions by Microwave Plasma Ignition in Internal Combustion Engine

A Novel Way to Enhance the Spark Plasma-Assisted Ignition for an Aero-Engine under Low Pressure

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge