Abstract:We propose a general strategy for fabricating ultrasmall attoliter-sized (10(-18) L) one-dimensional (1D) aligned nanocup arrays embedded in poly(dimethylsiloxane) (PDMS) films based on a combination of colloidal soft-lithography and wrinkle processing. The nanocup consists of a metallic shell (silver-single or double-layer silver/gold type) with a thickness of several tens of nanometers and whose diameter was ca. 500 nm and cavity depth was ca. 250 nm. First, monodisperse polystyrene (PS) colloids (d = 500 nm) were arranged onto a sinusoidally wrinkled PDMS substrate. Then, the colloid particle arrays were transferred onto another flat PDMS substrate, and a metal film was vacuum deposited over the array to form a nanostructured surface consisting of half-shell metal-coated colloid particle arrays. After the metal-coated PS array was gently transferred onto another soft PDMS substrate prepared by nonthermal curing, the attached films were thermally cured. After that, both films were carefully separated to selectively transfer the metal-coated PS particle arrays, since the metallic shell on the PS surface can adhere to the soft PDMS. Finally, the PS colloids were removed by plasma etching, leaving behind the 1D hemispherical metallic shells, called here the "metallic nanocup array structure". This structure was evaluated by performing atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy measurements. We further demonstrate chemical modification of the inner nanocup surface through construction of a self-assembled monolayer, and we also fill them with nanomaterials (silica nanoparticles) to demonstrate their application to size-selecting devices. The obtained metallic nanocup arrays could be components in a new class of chemical and/or biological nanoreactors with small reaction vessels, surface-enhanced Raman scattering (SERS)-based sensors, and size separators for nanoparticles.

Fabrication of Stereo Metallic Resonant Structures with Polymer Droplets As Template

Fabrication of Patterned Polymer Resists for Ion Etching by Using Dewetting

Standing Surface Acoustic Wave-Assisted Fabrication of Region-Selective Microstructures Via User-Defined Waveguides.

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

LOCALIZED MICROSTRUCTURES FABRICATION THROUGH STANDING SURFACE ACOUSTIC WAVE AND USER-DEFINED WAVEGUIDES

Acoustofluidic Waveguides for Fabrication of Localized Polymeric Microstructure Arrays

High-aspect-ratio three-dimensional polymer and metallic microstructure microfabrication using two-photon polymerization

Fabrication of Metallic Split-Ring Arrays for Metamaterials Using Silica Particle Templates Anchored on A Silicon Substrate

Monolayer Rigid Arrays of Cavity-Controllable Metallic Mesoparticles: Electrochemical Preparation and Light Transmission Resonances

Fabrication of Plasmonic Nanoparticles on a Wave Shape PDMS Substrate

Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating

Fabrication of photopolymer hierarchical micronanostructures by coupling electrospinning and photolithography for SERS substrates

Novel route to fabrication of metal-sandwiched nanoscale tapered structures

Fabrication of Submicron Structures in Nanoparticle/polymer Composite by Holographic Lithography and Reactive Ion Etching

Tapered Dielectric Structure In Metal As A Wavelength-Selective Surface Plasmon Polariton Focuser

Large‐Area Fabrication of Highly Tunable Hybrid Plasmonic–Photonic Structures Based on Colloidal Lithography and a Photoreconfigurable Polymer

A new process for fabricating tip-shaped polymer microstructure array with patterned metallic coatings

Nanofabrication of high aspect ratio structures using an evaporated resist containing metal

Fabrication of suspended metal–dielectric–metal plasmonic nanostructures

Fabrication and functionalization of periodically aligned metallic nanocup arrays using colloidal lithography with a sinusoidally wrinkled substrate

The Synthesis and Assembly Mechanism of Micro/Nano-Sized Polystyrene Spheres and Their Application in Subwavelength Structures